Miele W 1930I Problem solving guide, Program does not, Start?, Check p / q indi

Problem solving guide

Any work done on the electrical components of this appliance should only be performed by a qualified and trained person in accordance with all local and national codes and regulations. Unauthorized repairs may result in personal injury and damage to the machine.

What to do if, . . .	Cause . . .	Remedy . . .
. . . The program does not	There is no power.	Check that..:
	The “ON” indicator lamp has	– the door is properly closed.
start?
	not lit up.	– the machine is plugged in.
		– the fuse or circuit breaker has
		not tripped.
	There is power and the “ON”	– Turn the program selector to
	indicator lamp is on, but the	the “Finish / Start” position.
	program selector has not been	– Select a program.
	turned to the “Finish / Start”
	position.
. . . The “Check p / q” indi-	The “Check p” indicator lamp	– The inlet valve is not opened
	is flashing, and the program	far enough.
cator lamps are flashing?
	has started.	– The inlet hose is kinked.
	The water inlet is blocked.
		– The water pressure is too low.
		Call the Service Dept.
	The “Check q” indicator lamp	– Clean the drain pump and lint
	is flashing.	trap.
	The drain is blocked.	– Has the drain hose been
		installed too high? (max drain
		height = 4 feet)

25