Miele W 1930I operating instructions Additional rinse in Rapid wash

Page 45

Programmable functions

EAdditional rinse in Rapid wash

Set the Program selector to “WOOLENS 85°”. Continue with Step 5 to activate.

Step 5: activate the function

Press the “Water plus” button twice (i.e. in and out once) to toggle the function “ON/OFF”.

The “Rinse 1-2” lamp will illuminate when the function is activated.

Step 6: to store in memory

Press the “ON/OFF” button.

45

Image 45

Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of your old machine Disposal of the packing materialEconomy Economical usagePreparing the Laundry Before washingPrepare the wash load Press the Door button to open the door Load the machine To start a programRecommended load sizes are noted below Close the machine doorEnd of Program After washingClose the drum door Changing the program sequence To cancel a programTo interrupt a program To change an incorrectly selected programAdding detergent Using the Starch program to dis- pense liquid starch Adding fabric softener or starchStarch Program selection 11 lbs Explanations Program sequenceInterim rinse Graduated rinseGraduated spin Starch Spin Fine rinseFinal spin WoolensTemperature Conversion Chart Textile care symbolsWashing C Tumble dryPre-wash Additional optionsWater plus Gentle washDelay Start Delay start/Time remaining indicatorTime display Hmin Remaining timeUser Maintenance Instructions Cleaning and care Cleaning the washing machineCleaning the detergent drawer Cleaning the drain pump and lint trap Cleaning and careCleaning and Care Cleaning the water inlet filters To clean the filter in the inlet hoseTo clean the filter in the inlet valve Program does not Problem solving guideStart? Check p / q indiWhat to do if Cause Remedy Drawer? Into the machine? Large residues of deterThere is an excessive Build-up of foam?Cling to washed laundry? Grey greasy particlesGive the required result? After washing pilling apOpening the drum door in the event of a power failure Electric socket To check water pressureAfter sales service Installation surface Installation Instructions InstallationInstallation Removing the shipping strutsInstallation Building Levelling the machinePlease note the following Matching the control panel to the adjacent washer frontsPlate locations 1 and 2 only Installing the front panelInstallation Washer-Dryer stack Sizing the toekick Installing the toekickWater hardness reminder Connection to the drain sys- tem PlumbingGrounding Instructions Electrical connectionHigh water level only in Cottons rinses Operating Instructions Programmable functions5th Rinse in the Cottons program No water intake through compartmentStep Programmable functionsDesired function AHigh water level B5th rinse cycle DProgram Lock Child safety featureAdditional rinse in Rapid wash To check if the function has been stored Deleting the additional func- tionsCarry out Steps 1 to Dimensions Installation Instructions Technical dataTechnical data Page Page