Miele W 1930I operating instructions Installation

Page 37

Installation

Right-hand hinge

Left-hand hinge

Open the door and remove the lower screw from the upper hinge.

Using the screws provided, loosely attach the front panel th the machine door through the now empty lower hinge hole and the corresponding hole on the unhinged side of the door (see illustration).

Align the front panel and tighten the two screws.

The remaining pilot holes can now be drilled into the front panel through the holes in the machine door.

Use the remaining screws to se- curely mount the front panel to the machine door.

37

Image 37

Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of your old machine Disposal of the packing materialEconomy Economical usageBefore washing Preparing the LaundryPrepare the wash load Press the Door button to open the door Load the machine To start a programRecommended load sizes are noted below Close the machine doorAfter washing End of ProgramClose the drum door Changing the program sequence To cancel a programTo interrupt a program To change an incorrectly selected programAdding detergent Adding fabric softener or starch Using the Starch program to dis- pense liquid starchStarch Program selection 11 lbs Explanations Program sequenceInterim rinse Graduated rinseGraduated spin Starch Spin Fine rinseFinal spin WoolensTemperature Conversion Chart Textile care symbolsWashing C Tumble dryPre-wash Additional optionsWater plus Gentle washDelay Start Delay start/Time remaining indicatorTime display Hmin Remaining timeCleaning the washing machine User Maintenance Instructions Cleaning and careCleaning the detergent drawer Cleaning the drain pump and lint trap Cleaning and careCleaning and Care To clean the filter in the inlet hose Cleaning the water inlet filtersTo clean the filter in the inlet valve Program does not Problem solving guideStart? Check p / q indiWhat to do if Cause Remedy Drawer? Into the machine? Large residues of deterThere is an excessive Build-up of foam?Cling to washed laundry? Grey greasy particlesGive the required result? After washing pilling apOpening the drum door in the event of a power failure Electric socket To check water pressureAfter sales service Installation surface Installation Instructions InstallationInstallation Removing the shipping strutsInstallation Building Levelling the machinePlease note the following Matching the control panel to the adjacent washer frontsPlate locations 1 and 2 only Installing the front panelInstallation Washer-Dryer stack Sizing the toekick Installing the toekickWater hardness reminder Connection to the drain sys- tem PlumbingGrounding Instructions Electrical connectionHigh water level only in Cottons rinses Operating Instructions Programmable functions5th Rinse in the Cottons program No water intake through compartmentStep Programmable functionsDesired function AHigh water level B5th rinse cycle DProgram Lock Child safety featureAdditional rinse in Rapid wash Deleting the additional func- tions To check if the function has been storedCarry out Steps 1 to Dimensions Installation Instructions Technical dataTechnical data Page Page