Delay start/Time remaining indicator
Time display “H:min”
The Time display has a dual function.
The Delayed start is activated by pressing the button, or;
It shows the time remaining in the wash program.
Delay Start
If the “Delay start” lamp is blinking, the start of the program can be delayed up to 9 hours and 30 minutes.
Entering the start delay:
–Press the button to the left of the “Delay start” lamp as many times as necessary until the desired delay time appears. Each time the button is pressed, the time of delay will in- crease by 30 minutes.
Select the program
–The display will begin counting the delayed time backwards in one minute increments.The “Delay start” lamp will remain lit.
Program start
–When the delay time reaches zero, the “Time remaining” lamp illumi- nates, and the “Delay start” lamp goes out. The duration of the se- lected program will be shown on the display.
Deleting the start delay
–When the display reaches “9 h 30 min”, press the button to the left of the “Delay start” lamp and the start delay will be deleted.
Remaining time
The remaining time for program com- pletion is shown in hours and minutes as soon as:
–A program is selected.
–The time delay reaches zero.
The display counts backwards in 1 minute increments.
20