Miele W 1930I Into the machine? Large residues of deter, Drawer?, There is an excessive

Problem solving guide

What to do if, . . .	Cause . . .	Remedy . . .
. . . In spite of adequate water	A filter in the water inlet system	Clean the water inlet filters.
supply, the water flows slowly	is blocked.
into the machine?
. . . Large residues of deter-	The water pressure is too low.	– Clean the filters in the water
		inlet system.
gent remain in the dispenser
		– It may help to select “Water
drawer?
		plus”.
	Detergent used with a water	Pour detergent into the
	softener tends to become sticky.	dispenser before adding any
		water softener.
. . Fabric softener is not com-	The dispenser drawer was not	Make sure the drawer is all the
pletely dispensed or water re-	pushed in when the fabric	way in.
	softener was being dispensed.
mains in the p compartment?
	The siphon tube is either	Clean the siphon tube.
	incorrectly positioned or
	clogged.
. . . There is an excessive	Use only a low-sudsing	– Follow recommendations on
	detergent at the appropriate	the package.
build-up of foam?
	temperature.	– Take the water hardness into
		account.
		– Use less detergent for lightly
		soiled or small loads.
. . . Lime deposits appear on	Not enough detergent has been	– Use a decalcifier suitable for
	used.	use in washing machines. A
the drum surface?
		product called “Quick” is
		available from the Miele Parts
		Department.
		– Use the correct amount of
		detergent for the water
		hardness in your area.

27