Miele W 1930I operating instructions Opening the drum door in the event of a power failure

Page 29

Problem solving guide

Opening the drum door in the event of a power failure

Switch off the washing machine.

Remove the flap opener from behind the detergent drawer facia panel.

Open the flap (in the machine plinth).

Place a dish or bowl under the spout.

Point the drain hose into the con- tainer.

Remove the stopper.

Caution: if laundry has been washed at a high temperature water draining out of the machine will still be hot!

The amount of water discharged de- pends on the drainage height. A de- livery head (e.g. 1 m) will mean there is more water to drain. The container will need to be emptied several times.

When no more water drains out place the stopper back in the hose.

29

Image 29
Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of your old machine Disposal of the packing materialEconomy Economical usagePrepare the wash load Preparing the LaundryBefore washing Press the Door button to open the door Load the machine To start a programRecommended load sizes are noted below Close the machine doorClose the drum door End of ProgramAfter washing Changing the program sequence To cancel a programTo interrupt a program To change an incorrectly selected programAdding detergent Starch Using the Starch program to dis- pense liquid starchAdding fabric softener or starch Program selection 11 lbs Explanations Program sequenceInterim rinse Graduated rinseGraduated spin Starch Spin Fine rinseFinal spin WoolensTemperature Conversion Chart Textile care symbolsWashing C Tumble dryPre-wash Additional optionsWater plus Gentle washDelay Start Delay start/Time remaining indicatorTime display Hmin Remaining timeCleaning the detergent drawer User Maintenance Instructions Cleaning and careCleaning the washing machine Cleaning the drain pump and lint trap Cleaning and careCleaning and Care To clean the filter in the inlet valve Cleaning the water inlet filtersTo clean the filter in the inlet hose Program does not Problem solving guideStart? Check p / q indiWhat to do if Cause Remedy Drawer? Into the machine? Large residues of deterThere is an excessive Build-up of foam?Cling to washed laundry? Grey greasy particlesGive the required result? After washing pilling apOpening the drum door in the event of a power failure Electric socket To check water pressureAfter sales service Installation surface Installation Instructions InstallationInstallation Removing the shipping strutsInstallation Building Levelling the machinePlease note the following Matching the control panel to the adjacent washer frontsPlate locations 1 and 2 only Installing the front panelInstallation Washer-Dryer stack Sizing the toekick Installing the toekickWater hardness reminder Connection to the drain sys- tem PlumbingGrounding Instructions Electrical connectionHigh water level only in Cottons rinses Operating Instructions Programmable functions5th Rinse in the Cottons program No water intake through compartmentStep Programmable functionsDesired function AHigh water level B5th rinse cycle DProgram Lock Child safety featureAdditional rinse in Rapid wash Carry out Steps 1 to To check if the function has been storedDeleting the additional func- tions Dimensions Installation Instructions Technical dataTechnical data Page Page