Miele W 1930I operating instructions End of Program, After washing, Close the drum door

Page 10

End of Program

After washing

1Turn the program selector switch to “Finish/Start”

2Press the “ON/OFF” button.

3Press the “Door” button.

Do not attempt to remove laundry from the machine if the drum is turning. You may seriously injure yourself. If the drum turns with the door open, contact the Miele Service Department.

4Remove the wash.

5Check the folds in the door seal for any small articles such as but- tons or nails which may be lodged there.

Make sure the drum is empty by manually turning it completely around or, during the next use, items may be damaged (e.g. shrink) or cause other laundry to discolor.

6Close the drum door.

10

Image 10
Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of the packing material Disposal of your old machineEconomical usage EconomyBefore washing Preparing the LaundryPrepare the wash load Recommended load sizes are noted below To start a programPress the Door button to open the door Load the machine Close the machine doorAfter washing End of ProgramClose the drum door To interrupt a program To cancel a programChanging the program sequence To change an incorrectly selected programAdding detergent Adding fabric softener or starch Using the Starch program to dis- pense liquid starchStarch Program selection 11 lbs Interim rinse Program sequenceExplanations Graduated rinseFinal spin Starch Spin Fine rinseGraduated spin WoolensWashing C Textile care symbolsTemperature Conversion Chart Tumble dryWater plus Additional optionsPre-wash Gentle washTime display Hmin Delay start/Time remaining indicatorDelay Start Remaining timeCleaning the washing machine User Maintenance Instructions Cleaning and careCleaning the detergent drawer Cleaning and care Cleaning the drain pump and lint trapCleaning and Care To clean the filter in the inlet hose Cleaning the water inlet filtersTo clean the filter in the inlet valve Start? Problem solving guideProgram does not Check p / q indiWhat to do if Cause Remedy There is an excessive Into the machine? Large residues of deterDrawer? Build-up of foam?Give the required result? Grey greasy particlesCling to washed laundry? After washing pilling apOpening the drum door in the event of a power failure To check water pressure Electric socketAfter sales service Installation Installation Instructions InstallationInstallation surface Removing the shipping strutsInstallation Levelling the machine BuildingMatching the control panel to the adjacent washer fronts Please note the followingInstalling the front panel Plate locations 1 and 2 onlyInstallation Sizing the toekick Installing the toekick Washer-Dryer stackWater hardness reminder Plumbing Connection to the drain sys- temElectrical connection Grounding Instructions5th Rinse in the Cottons program Operating Instructions Programmable functionsHigh water level only in Cottons rinses No water intake through compartmentProgrammable functions StepDProgram Lock Child safety feature Desired function AHigh water level B5th rinse cycleAdditional rinse in Rapid wash Deleting the additional func- tions To check if the function has been storedCarry out Steps 1 to Installation Instructions Technical data DimensionsTechnical data Page Page