Miele W 1930I operating instructions Technical data

Page 48

Technical data

1.2Specifications

Hot and cold water hoses come equipped with 3/4" Female hose thread connec- tions.

Drainage is via a 5 ft. long (1.5 m), 1 1/4" OD hose.

This washing machine is supplied with a 5 feet long cable with plug for connection to a 120/240 V (208 V) 60 Hz (3-pole-4 wire grounding) power supply.

Program duration (approximate):
Cottons without prewash	170°F	1 h 49 min
Rapid wash – Cottons (3.5 lbs)	140°F	39 min
Spin speed:
W 1930i	from 400 to 1600 rpm
Detergent dispenser:
Automatic for:	Pre-wash
	Main wash
	Fabric softener or starch
Temperature control:	Variable from cold to 170°F

48

Image 48

Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of the packing material Disposal of your old machineEconomical usage EconomyPreparing the Laundry Before washingPrepare the wash load To start a program Press the Door button to open the door Load the machineRecommended load sizes are noted below Close the machine doorEnd of Program After washingClose the drum door To cancel a program Changing the program sequenceTo interrupt a program To change an incorrectly selected programAdding detergent Using the Starch program to dis- pense liquid starch Adding fabric softener or starchStarch Program selection 11 lbs Program sequence ExplanationsInterim rinse Graduated rinseStarch Spin Fine rinse Graduated spinFinal spin WoolensTextile care symbols Temperature Conversion ChartWashing C Tumble dryAdditional options Pre-washWater plus Gentle washDelay start/Time remaining indicator Delay StartTime display Hmin Remaining timeUser Maintenance Instructions Cleaning and care Cleaning the washing machineCleaning the detergent drawer Cleaning and care Cleaning the drain pump and lint trapCleaning and Care Cleaning the water inlet filters To clean the filter in the inlet hoseTo clean the filter in the inlet valve Problem solving guide Program does notStart? Check p / q indiWhat to do if Cause Remedy Into the machine? Large residues of deter Drawer?There is an excessive Build-up of foam?Grey greasy particles Cling to washed laundry?Give the required result? After washing pilling apOpening the drum door in the event of a power failure To check water pressure Electric socketAfter sales service Installation Instructions Installation Installation surfaceInstallation Removing the shipping strutsInstallation Levelling the machine BuildingMatching the control panel to the adjacent washer fronts Please note the followingInstalling the front panel Plate locations 1 and 2 onlyInstallation Sizing the toekick Installing the toekick Washer-Dryer stackWater hardness reminder Plumbing Connection to the drain sys- temElectrical connection Grounding InstructionsOperating Instructions Programmable functions High water level only in Cottons rinses5th Rinse in the Cottons program No water intake through compartmentProgrammable functions StepDProgram Lock Child safety feature Desired function AHigh water level B5th rinse cycle Additional rinse in Rapid wash To check if the function has been stored Deleting the additional func- tionsCarry out Steps 1 to Installation Instructions Technical data DimensionsTechnical data Page Page