Installation
Sizing the toekick | Installing the toekick |
The appliance toekick visible below the door can be partially conceated by in- stalling a custom made toekick that matches the adjacent cabinetry.
Please note: The depth of recess and height of the appliance toekick cannot be altered.
The lenght of the matching toekick should be 23 5/8" (600 mm). Maximum toekicks heights are listed below.
Height from the | Number | Maximum |
floor to the bot- | of | toekick height |
tom of the | spacer |
|
countertop | frames |
|
| rquired |
|
|
|
|
32 1/4" (820 mm) | none | 3 15/16" (100 mm) |
34 1/4" (870 mm) | 1 | 5 15/16" (150 mm) |
36 1/4" (920 mm) | 2 | 7 7/8" (200 mm) |
The matching toekick must be cut out so that access to the emer- gency drain and door release panel is not impeded.
Align and attach the two Velcro strips to each other. Cut the strip into three equal pieces.
Remove the protective backing from one side of the three Velcro strips. Press them into place on the washer toekick.
Peel the protective backing off of the second, exposed side of the Velcro strip.
Align the matching toekick with the machine toekick and press it fimly into place.
Washer-Dryer stack
This Miele washing machine can be in- stalled as a washer/dryer stack together with a Miele tumble dryer. For this purpose, a stacking kit, available from the Miele Parts Dept., is needed.
A washer and dryer should never be stacked without using the proper stacking kit.
38