OPERATING INSTRUCTIONS Programmable functions
Warning - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY IN- STRUCTIONS before operating this appliance.
Additional functions can be pro- grammed into the machine if desired:
AHigh water level (only in “Cottons” rinses)
Where rinse results are particularly im- portant (e.g. Soap allergies).
B5th Rinse in the “Cottons” program
For soft water areas (up to 135 ppm cal- cium carbonate).
In soft water areas, a higher water level can be selected in addition to a 5th rinse cycle, if required.
CNo water intake through compartment i
The 10 second water intake through compartment i during the main wash is omitted.
vated, but the program will continue un- interrupted. This prevents children from inadvertently changing or stopping a wash program by playing with the dials.
If the program selector switch is turned to its original position, the “On” lamp will stop flashing.
To change a program once the Program lock is activated:
Turn the program selector switch to “Finish/Start”.
The sequence indicator lamps will start flashing in succession after about 30 seconds. A new program can be se- lected as soon as the “On” lamp is the only one remaining lit.
The functions described above can be programmed by the Customer using the steps shown on the follow- ing pages.
There are other programmable func- tions which are reserved for Miele Service Engineers. They are not nor- mally activated, and require access to internal machine components.
EAdditional rinse in Rapid wash
DProgram Lock (Child safety feature)
When activated, the washing machine will ignore any changes made after the first three minutes of operation. For example if the program selector switch is moved to a different setting or an ad- ditional function is selected, the “On” lamp will flash, notifying you that the Child safety feature has been acti-
For soft water areas.
For an extra thorough rinse.
42