Miele W 1930I operating instructions Cleaning and Care

Page 23

Cleaning and Care

Once the flow of water stops, remove the lint trap and clean it.

Remove any foreign objects or lint.

Turn the drain pump impeller (in the back of the chamber) by hand to check that it rotates freely. Any foreign objects should be removed.

Clean inside of the lint trap housing.

Remove any detergent deposits or foreign objects from the thread of the fil- ter housing and filter unit before replac- ing the lint trap.

Image 23

Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of your old machine Disposal of the packing materialEconomy Economical usagePrepare the wash load Preparing the LaundryBefore washing Close the machine door To start a programPress the Door button to open the door Load the machine Recommended load sizes are noted belowClose the drum door End of ProgramAfter washing To change an incorrectly selected program To cancel a programChanging the program sequence To interrupt a programAdding detergent Starch Using the Starch program to dis- pense liquid starchAdding fabric softener or starch Program selection 11 lbs Graduated rinse Program sequenceExplanations Interim rinseWoolens Starch Spin Fine rinseGraduated spin Final spinTumble dry Textile care symbolsTemperature Conversion Chart Washing CGentle wash Additional optionsPre-wash Water plusRemaining time Delay start/Time remaining indicatorDelay Start Time display HminCleaning the detergent drawer User Maintenance Instructions Cleaning and careCleaning the washing machine Cleaning the drain pump and lint trap Cleaning and careCleaning and Care To clean the filter in the inlet valve Cleaning the water inlet filtersTo clean the filter in the inlet hose Check p / q indi Problem solving guideProgram does not Start?What to do if Cause Remedy Build-up of foam? Into the machine? Large residues of deterDrawer? There is an excessiveAfter washing pilling ap Grey greasy particlesCling to washed laundry? Give the required result?Opening the drum door in the event of a power failure Electric socket To check water pressureAfter sales service Removing the shipping struts Installation Instructions InstallationInstallation surface InstallationInstallation Building Levelling the machinePlease note the following Matching the control panel to the adjacent washer frontsPlate locations 1 and 2 only Installing the front panelInstallation Washer-Dryer stack Sizing the toekick Installing the toekickWater hardness reminder Connection to the drain sys- tem PlumbingGrounding Instructions Electrical connectionNo water intake through compartment Operating Instructions Programmable functionsHigh water level only in Cottons rinses 5th Rinse in the Cottons programStep Programmable functionsDesired function AHigh water level B5th rinse cycle DProgram Lock Child safety featureAdditional rinse in Rapid wash Carry out Steps 1 to To check if the function has been storedDeleting the additional func- tions Dimensions Installation Instructions Technical dataTechnical data Page Page