Changing the programme sequence
Changing a programme while it is running
You cannot change to another programme once a programme has started (this prevents unintentional alterations).
You will need to cancel the current programme before you can select a new one.
Cancelling a programme
^Press the Start/Stop button.
The items will be cooled down, depending on the temperature reached and how long they have been dried for.
If you press the Start/Stop button again during the cooling down phase, Finish will light up in the display.
^Switch the dryer off and then on again.
^You can now select a different programme.
Interrupting a programme
^Switch the dryer off. To continue drying
^Switch the dryer on.
The programme will continue, as long as the cooling down phase has not been reached.
Adding or removing laundry after a programme has started
^Press the Door button.
^Open the door.
,Do not touch the back of the drum when adding or removing items. The drum could be very hot - danger of burning.
^Add or remove items as required.
^Close the door.
^Press the Start/Stop button.
Note
The time remaining shown in the display may now vary from the actual drying time.
19