Miele T 7744 C Electronic system lock, To activate the lock, To deactivate the lock

Page 20

Electronic system lock

The system lock prevents the dryer being used without your knowledge.

It can be activated if wished.

The dryer's electronics are then locked. The dryer can still be switched on but a programme cannot be started.

–If an attempt is made to start a programme, the indicator light for the Low temperature button will come on and a key symbol 0-§will appear in the display.

The door is not locked and can be opened at any time.

To activate the lock

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

APress the Low temperature button and keep it pressed in whilst carrying out steps B to E.

BPress the I-On/0-Offbutton in.

The Automatic indicator light will come on.

CSlowly turn the programme selector three positions stage by stage in a clockwise direction.

Each of the three programme indicator lights must come on one after the other.

DNow slowly turn the programme selector six positions stage by stage in an anti-clockwise direction.

Each of the six programme indicator lights must come on one after the other.

The indicator light for the Low temperature button will flash and a key symbol 0-§will appear in the display.

ERelease the Low temperature button. The electronics have now been locked.

^Switch the dryer off.

To deactivate the lock

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

^The procedure is the same as for activating the lock. Carry out steps A to E as described previously.

At step E the indicator light for the Low temperature button will stop flashing and the key symbol 0-§will go out.

The electronics are no longer locked.

20

Image 20

Contents Operating instructions For condenser tumble dryer T 7744 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Correct application Safety with childrenTechnical safety Correct use Page Accessories Operating the tumble dryer Control panelDisplay Check lightsProgrammable functions Delay startProgramme duration / Estimated time remaining Care symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Select any additional optionsBefore the end of a programme Remove the laundry when the programme has finishedStart the programme Extra options / Delay start Low temperatureDelay start BuzzerProgramme chart Woollens handcare SmoothingAutomatic ShirtsCool air Warm airCancelling a programme Changing the programme sequenceChanging a programme while it is running Interrupting a programmeTo deactivate the lock Electronic system lockTo activate the lock Cleaning and care Emptying the condensed water containerPull out the container Empty the containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off the indicator Buzzer sounds To switch off the indicator LightOther problems Problem Possible cause Remedy Water leaks from Been cleanedDryer after Condenser unit hasProblem Possible cause Remedy Tumble dryer fails to Start when switched onInterior drum Lighting does not comeChanging the lamp After sales service Future updates PCGuarantee Optional accessoriesInstallation and connection Front viewWasher-dryer stack Rear view Installation siteTransporting the machine to its installation site Room ventilation Before moving the machine again e.g. when moving houseLevelling the machine Arranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data SmoothingTechnical data Programmable functions For changing default settings Programmable functions Extending the range of the drying levelsFollow steps a to F to programme and store in memory Altering the volume of the buzzerNormal buzzer Default setting Loud buzzer Memory deactivated Default setting Memory activated Memory functionExtending the cooling down time Cooling down time will be ten minutes longerClean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070