Miele T 7744 C operating instructions Installation and connection

Installation and connection

1Adapter

2Nut

3Hose clip

4End of the hose

5Non-return valve

6Dryer drain hose

^Fit adapter 1 to the sink drain outlet using nut 2.

If this nut has a flat disc in it you should take the disc out first.

^Attach the end of the hose 4 to adapter 1.

^Use a screwdriver to tighten hose clip 3 up close to the nut.

,The non-return valve 5 must only be fitted in an upright position or at a slight angle (see illustration). If it is fitted in a horizontal position it will not work correctly.

^Fit the non-return valve 5 to the drain hose of the dryer 6 (make sure it is in the correct position, see illustration).

^Secure the non-return valve using hose clips.

40