Extra options / Delay start
Low temperature
For all delicate or minimum iron fabrics with the r symbol on the care label (e.g. acrylic garments).
–The programme duration is longer.
–On some programmes Low temperature is a standard part of the programme and so cannot be deselected.
Buzzer
A buzzer sounds (at intervals for a maximum of 1 hr) to let you know the programme has finished.
The buzzer will still sound if there is a fault, even if it has been switched off.
Delay start
The start of a programme can be delayed by 30 minutes up to 24 hours.
After selecting a programme:
^Press the Delay start button repeatedly until the required delay period shows in the display.
–The Delay start indicator light will flash.
–Times of:
up to 10^ are selected in 30 minute steps
more than 10^ in 1 hour steps
–If you keep the Delay start button pressed in, the time will continue to increase up to 24^.
To begin delay start
^Press the Start/Stop button.
–The Delay start indicator light will light up constantly.
The delay start time counts down towards the start of the programme as follows:
–more than 10^ by the hour
–less than 10^ in minutes
The drum will turn briefly every hour to help prevent creasing.
While the delay start time is counting down, you can still add laundry to the drum:
^Switch the dryer off.
^Open the door and add the laundry.
^Close the door and switch the dryer back on again.
To cancel/alter delay start
^Press the Start/Stop button. This cancels delay start.
^To alter the delay start time, press the Delay start button repeatedly until the required delay period shows in the display.
^Press the Start/Stop button.
The altered delay start time will start counting down from the beginning again.
15