Miele T 7744 C operating instructions Other problems

Page 30

Problem solving guide

Other problems

Problem

Possible cause

Remedy

The drying

Please check all the possible causes and switch the dryer

process goes

off and then back on again.

 

on too long or

Ventilation to and from the dryer

Open a door or window while

even switches

may be insufficient (e.g.

the machine is in operation

off.

because it is installed in a small

for increased air flow.

 

In some

room). This has caused the

 

circumstances,

temperature in the room to rise

 

the Clean out

sharply.

 

airways

The fluff filters are clogged up

– Remove any fluff.

indicator light

with fluff or were still wet when

– The fluff filters must be

still comes on,

they were replaced.

completely dry.

even though

The laundry has not been spun

Make sure that your laundry is

the filters are

sufficiently.

thoroughly spun at the

clean.

 

appropriate spin speed.

 

 

 

The tumble dryer has been

Do not exceed the maximum

 

overloaded.

load for the programme

 

 

selected.

 

Metallic components, e.g. zips

– Open zips next time.

 

have prevented the dryer from

If the problem occurs again,

 

registering the correct moisture

dry garments with long zips

 

level in the laundry.

using the Warm air

 

 

programme (timed drying).

 

Detergent residues, hair and

Check the condenser unit

 

fine fibres can block up the

from time to time and clean it

 

condenser unit.

if necessary.

 

The vents below the door are

Remove any objects that are

 

blocked.

blocking the vents.

The laundry is

The load consisted of different

– Finish drying using the

not sufficiently

fabrics.

Warm air programme.

dry.

 

– Select a different

 

 

programme next time.

30

Image 30
Contents Operating instructions For condenser tumble dryer T 7744 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Safety with children Technical safetyCorrect application Correct use Page Accessories Display Operating the tumble dryerControl panel Check lightsDelay start Programme duration / Estimated time remainingProgrammable functions Care symbols Tips on dryingSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect a programme Select any additional optionsRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Delay start Extra options / Delay startLow temperature BuzzerProgramme chart Automatic Woollens handcareSmoothing ShirtsCool air Warm airChanging a programme while it is running Cancelling a programmeChanging the programme sequence Interrupting a programmeElectronic system lock To activate the lockTo deactivate the lock Pull out the container Cleaning and careEmptying the condensed water container Empty the containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Check and fault messagesTo switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator LightOther problems Dryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Condenser unit hasInterior drum Problem Possible cause Remedy Tumble dryer fails toStart when switched on Lighting does not comeChanging the lamp Guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewRear view Installation site Transporting the machine to its installation siteWasher-dryer stack Before moving the machine again e.g. when moving house Levelling the machineRoom ventilation External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data SmoothingTechnical data Programmable functions For changing default settings Programmable functions Extending the range of the drying levelsAltering the volume of the buzzer Normal buzzer Default setting Loud buzzerFollow steps a to F to programme and store in memory Memory deactivated Default setting Memory activated Memory functionExtending the cooling down time Cooling down time will be ten minutes longerClean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070