Miele T 7744 C Operating the tumble dryer, Control panel, Display, Check lights

Page 9

Operating the tumble dryer

Control panel

aDisplay

bDelay start button This button is used for:

-Selecting the duration of the Warm air and Cool air programmes

-Delaying the start of a programme

cBuzzer button

An audible tone sounds at the end of the programme.

dCheck lights

These indicator lights have various functions. See "Problem solving guide" / "After sales service" for details.

eStart/Stop button

For starting the programme selected and cancelling a programme once it has started.

The button flashes while a programme is being selected and then is on constantly when the programme has started.

fLow temperature button

Delicate fabrics are dried at a lower temperature.

gDrying level button with indicator lights

hProgramme selector with indicator lights

iDoor button

Pressing this button will open the door even when the machine is switched off at the mains.

jI-On/0-Off button

For switching the dryer on and off.

9

Image 9
Contents Operating instructions For condenser tumble dryer T 7744 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Safety with children Technical safetyCorrect application Correct use Page Accessories Control panel Operating the tumble dryerDisplay Check lightsDelay start Programme duration / Estimated time remainingProgrammable functions Tips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect any additional options Select a programmeRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Low temperature Extra options / Delay startDelay start BuzzerProgramme chart Smoothing Woollens handcareAutomatic ShirtsWarm air Cool airChanging the programme sequence Cancelling a programmeChanging a programme while it is running Interrupting a programmeElectronic system lock To activate the lockTo deactivate the lock Emptying the condensed water container Cleaning and carePull out the container Empty the containerCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off the indicator Buzzer sounds To switch off the indicator LightOther problems Been cleaned Problem Possible cause Remedy Water leaks fromDryer after Condenser unit hasStart when switched on Problem Possible cause Remedy Tumble dryer fails toInterior drum Lighting does not comeChanging the lamp Future updates PC After sales serviceGuarantee Optional accessoriesFront view Installation and connectionRear view Installation site Transporting the machine to its installation siteWasher-dryer stack Before moving the machine again e.g. when moving house Levelling the machineRoom ventilation External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation and connection Non-rewireable plugs BS Electrical connectionElectrical connection U.K Smoothing Consumption dataTechnical data Programmable functions For changing default settings Extending the range of the drying levels Programmable functionsAltering the volume of the buzzer Normal buzzer Default setting Loud buzzerFollow steps a to F to programme and store in memory Memory function Memory deactivated Default setting Memory activatedCooling down time will be ten minutes longer Extending the cooling down timeDefault setting Clean out airways indicatorKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070