Miele T 7744 C operating instructions

Page 7

Warning and Safety instructions

The dryer must not be used without the fluff filters in place or if the fluff

filters are damaged in any way.

The dryer must not be used without the condenser unit in place.

The fluff filters must be thoroughly dried after cleaning. Damp or wet

filters could cause operational faults.

Do not install the tumble dryer in a room where there is a risk of frost

occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly.

There is a risk of damage if the condensed water is allowed to freeze in the pump, hoses and / or condensed water container.

The ambient room temperature should be between +2°C and +35°C.

If the water is drained externally through the drain hose instead of

being collected in the condensed water container, make sure the drain hose is securely attached if you hang it in a sink or basin to avoid the hose slipping and the water causing damage.

Condensed water is not drinking water.

It can cause health problems in both people and animals.

Always keep the area around the tumble dryer free of dust and fluff.

Dust drawn into the machine can over time cause blockages in the condenser unit.

7

Image 7
Contents Operating instructions For condenser tumble dryer T 7744 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Technical safety Safety with childrenCorrect application Correct use Page Accessories Check lights Operating the tumble dryerControl panel DisplayProgramme duration / Estimated time remaining Delay startProgrammable functions Tips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundrySelect any additional options Select a programmeStart the programme Remove the laundry when the programme has finishedBefore the end of a programme Buzzer Extra options / Delay startLow temperature Delay startProgramme chart Shirts Woollens handcareSmoothing AutomaticWarm air Cool airInterrupting a programme Cancelling a programmeChanging the programme sequence Changing a programme while it is runningTo activate the lock Electronic system lockTo deactivate the lock Empty the container Cleaning and careEmptying the condensed water container Pull out the containerCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Check and fault messages Problem solving guideBuzzer sounds To switch off the indicator Light Problem Possible cause RemedyAirways indicator To switch off the indicatorOther problems Condenser unit has Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterLighting does not come Problem Possible cause Remedy Tumble dryer fails toStart when switched on Interior drumChanging the lamp Optional accessories After sales serviceFuture updates PC GuaranteeFront view Installation and connectionTransporting the machine to its installation site Rear view Installation siteWasher-dryer stack Levelling the machine Before moving the machine again e.g. when moving houseRoom ventilation General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation and connection Electrical connection Non-rewireable plugs BSElectrical connection U.K Smoothing Consumption dataTechnical data Programmable functions For changing default settings Extending the range of the drying levels Programmable functionsNormal buzzer Default setting Loud buzzer Altering the volume of the buzzerFollow steps a to F to programme and store in memory Memory function Memory deactivated Default setting Memory activatedCooling down time will be ten minutes longer Extending the cooling down timeDefault setting Clean out airways indicatorKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070