Programmable functions
Extending the cooling down time
The cooling down phase which takes place before the end of a programme can be lengthened if required. This makes the garments easier to handle.
The cooling down time
–can be extended by 5 minutes or 10 minutes.
–is not available for timed drying, smoothing or handcare programmes.
Follow steps A to F to programme and store in memory.
Before you begin, first ensure that:
–The tumble dryer is switched off.
–The door is closed.
APress the Start/Stop button and keep it pressed in whilst carrying out steps
BPress the
Wait until the indicator light for the Start/Stop button lights up constantly . . .
C. . . and then release the Start/Stop button.
DPress the Low temperature button three times.
–The Low temperature indicator light will briefly flash on and off seven times.
–P and 0 (default setting) will flash alternately in the display.
The number which appears alternately in the display with P means:
0Default setting
iThe cooling down time will be five minutes longer.
(The Automatic indicator light will also flash once).
2The cooling down time will be ten minutes longer.
(The Automatic indicator light will also flash twice).
EPressing the Start/Stop button switches from one to the other.
FSwitch the dryer off with the
The setting you have selected is now stored in memory. You can change it again at any time.
48