Miele T 7744 C Programmable functions, Extending the range of the drying levels

Page 45

Programmable functions

Extending the range of the drying levels

You can extend the range of the drying levels for many of the programmes:

Machine iron+

(drier than Machine iron).

Hand iron+

(drier than Hand iron).

Normal+

(drier than Normal).

In addition the Extra dry drying level can be made available for the Delicates and Denim programmes.

You can use this programmable function to extend the range of the drying levels for the following programmes:

Cottons, Minimum iron*, Delicates, Automatic, Denim.

*Machine iron+ cannot be programmed for this programme.

Follow steps A to E to programme and store in memory.

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

APress the Start/Stop button and keep it pressed in whilst carrying out steps

B-C.

BPress the I-On/0-Offbutton in.

Wait until the indicator light for the Start/Stop button lights up constantly . . .

C. . . and then release the Start/Stop button.

The Low temperature indicator light will briefly flash on and off twice.

P and 0 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0Default setting

1Drying level range extended (The Automatic indicator light will also flash).

DPressing the Start/Stop button switches from one to the other.

ESwitch the dryer off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

To select the extended drying level

^Select a programme.

^Press the drying level button repeatedly until one or two indicator lights come on.

Indicator lights Extra dry and Normal = Normal+

Indicator lights Hand iron and Normal = Hand iron+

Indicator lights Machine iron and Hand iron = Machine iron+

45

Image 45
Contents Operating instructions For condenser tumble dryer T 7744 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Safety with children Technical safetyCorrect application Correct use Page Accessories Control panel Operating the tumble dryerDisplay Check lightsDelay start Programme duration / Estimated time remainingProgrammable functions Tips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect any additional options Select a programmeRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Low temperature Extra options / Delay startDelay start BuzzerProgramme chart Smoothing Woollens handcareAutomatic ShirtsWarm air Cool airChanging the programme sequence Cancelling a programmeChanging a programme while it is running Interrupting a programmeElectronic system lock To activate the lockTo deactivate the lock Emptying the condensed water container Cleaning and carePull out the container Empty the containerCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off the indicator Buzzer sounds To switch off the indicator LightOther problems Been cleaned Problem Possible cause Remedy Water leaks fromDryer after Condenser unit hasStart when switched on Problem Possible cause Remedy Tumble dryer fails toInterior drum Lighting does not comeChanging the lamp Future updates PC After sales serviceGuarantee Optional accessoriesFront view Installation and connectionRear view Installation site Transporting the machine to its installation siteWasher-dryer stack Before moving the machine again e.g. when moving house Levelling the machineRoom ventilation External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation and connection Non-rewireable plugs BS Electrical connectionElectrical connection U.K Smoothing Consumption dataTechnical data Programmable functions For changing default settings Extending the range of the drying levels Programmable functionsAltering the volume of the buzzer Normal buzzer Default setting Loud buzzerFollow steps a to F to programme and store in memory Memory function Memory deactivated Default setting Memory activatedCooling down time will be ten minutes longer Extending the cooling down timeDefault setting Clean out airways indicatorKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070