Miele T 7744 C operating instructions Keypad tone

Page 50

Programmable functions

Keypad tone

An audible tone sounds each time a button is pressed.

Follow steps A to F to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

APress the Start/Stop button and keep it pressed in whilst carrying out steps

B-C.

BPress the I-On/0-Offbutton in.

Wait until the indicator light for the Start/Stop button lights up constantly . . .

C. . . and then release the Start/Stop button.

DPress the Low temperature button five times.

–The Low temperature indicator light will flash on and off slowly once and will then flash on and off quickly once.

–P and 0 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0Keypad tone deactivated (Default setting)

iKeypad tone activated

(The Automatic indicator light will also flash)

EPressing the Start/Stop button switches from one to the other.

FSwitch the dryer off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

50

Image 50

Contents Operating instructions For condenser tumble dryer T 7744 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Correct application Safety with childrenTechnical safety Correct use Page Accessories Display Operating the tumble dryerControl panel Check lightsProgrammable functions Delay startProgramme duration / Estimated time remaining Care symbols Tips on dryingSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect a programme Select any additional optionsBefore the end of a programme Remove the laundry when the programme has finishedStart the programme Delay start Extra options / Delay startLow temperature BuzzerProgramme chart Automatic Woollens handcareSmoothing ShirtsCool air Warm airChanging a programme while it is running Cancelling a programmeChanging the programme sequence Interrupting a programmeTo deactivate the lock Electronic system lockTo activate the lock Pull out the container Cleaning and careEmptying the condensed water container Empty the containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Check and fault messagesTo switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator LightOther problems Dryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Condenser unit hasInterior drum Problem Possible cause Remedy Tumble dryer fails toStart when switched on Lighting does not comeChanging the lamp Guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewWasher-dryer stack Rear view Installation siteTransporting the machine to its installation site Room ventilation Before moving the machine again e.g. when moving houseLevelling the machine Arranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data SmoothingTechnical data Programmable functions For changing default settings Programmable functions Extending the range of the drying levelsFollow steps a to F to programme and store in memory Altering the volume of the buzzerNormal buzzer Default setting Loud buzzer Memory deactivated Default setting Memory activated Memory functionExtending the cooling down time Cooling down time will be ten minutes longerClean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070