Miele T 7744 C Memory function, Memory deactivated Default setting Memory activated

Page 47

Programmable functions

Memory function

The electronics will memorise any extra options selected for a programme.

The duration selected for the timed drying programmes will also be stored in memory.

These settings will be selected automatically the next time the programme is chosen. You can either accept these or change them by pressing the appropriate button.

Follow steps A to F to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

APress the Start/Stop button and keep it pressed in whilst carrying out steps

B-C.

BPress the I-On/0-Offbutton in.

Wait until the indicator light for the Start/Stop button lights up constantly . . .

C. . . and then release the Start/Stop button.

DPress the Low temperature button twice.

–The Low temperature indicator light will briefly flash on and off six times.

–P and 0 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0Memory deactivated (Default setting).

iMemory activated

(The Automatic indicator light will also flash).

EPressing the Start/Stop button switches from one to the other.

FSwitch the dryer off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

47

Image 47

Contents Operating instructions For condenser tumble dryer T 7744 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Correct application Safety with childrenTechnical safety Correct use Page Accessories Check lights Operating the tumble dryerControl panel DisplayProgrammable functions Delay startProgramme duration / Estimated time remaining Tips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundrySelect any additional options Select a programmeBefore the end of a programme Remove the laundry when the programme has finishedStart the programme Buzzer Extra options / Delay startLow temperature Delay startProgramme chart Shirts Woollens handcareSmoothing AutomaticWarm air Cool airInterrupting a programme Cancelling a programmeChanging the programme sequence Changing a programme while it is runningTo deactivate the lock Electronic system lockTo activate the lock Empty the container Cleaning and careEmptying the condensed water container Pull out the containerCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Check and fault messages Problem solving guideBuzzer sounds To switch off the indicator Light Problem Possible cause RemedyAirways indicator To switch off the indicatorOther problems Condenser unit has Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterLighting does not come Problem Possible cause Remedy Tumble dryer fails toStart when switched on Interior drumChanging the lamp Optional accessories After sales serviceFuture updates PC GuaranteeFront view Installation and connectionWasher-dryer stack Rear view Installation siteTransporting the machine to its installation site Room ventilation Before moving the machine again e.g. when moving houseLevelling the machine Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation and connection Electrical connection U.K Non-rewireable plugs BSElectrical connection Smoothing Consumption dataTechnical data Programmable functions For changing default settings Extending the range of the drying levels Programmable functionsFollow steps a to F to programme and store in memory Altering the volume of the buzzerNormal buzzer Default setting Loud buzzer Memory function Memory deactivated Default setting Memory activatedCooling down time will be ten minutes longer Extending the cooling down timeDefault setting Clean out airways indicatorKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070