Water Supply Requirements, Drain Requirements

Installation Instructions

WATER SUPPLY REQUIREMENTS

Hot and cold water faucets MUST be installed within

42 inches (107 cm) of your washer’s water inlet. The faucets MUST be 3/4σ (1.9 cm) garden hose-type so inlet hoses can be connected. Water pressure MUST be between 10 and 120 pounds per square inch. Your water department can advise you of your water pressure. The hot water temperature should be set to deliver water at 120° to 140°F (48°–60°C) to provide proper Automatic Temperature Control (ATC) performance.

NOTE: A water softener is recommended to reduce buildup of scale inside the steam generator if the home water supply is very hard.

DRAIN REQUIREMENTS

1.Drain capable of eliminating 17 gals (64.3 L) per minute.

2.A standpipe diameter of 1 1/4σ (3.18 cm) minimum.

3.The standpipe height above the floor should be:

Minimum height: 24σ (61 cm)

Maximum height: 96σ (244 cm)

BACK

96”

(244 cm)

Max.

24”

(61 cm)

Min.

NOTE: The drain hose attached to the washer can reach a 58σ (147 cm) high standpipe. For a higher standpipe, contact an authorized parts distributor.

INSTALLING THE WASHER

1. Run some water from the hot and cold faucets to flush the water lines and remove particles that might clog

the water valve screens.

2.Remove the inlet hoses from the plastic bag.

3.(90° elbow end)

Carefully connect the inlet hose marked HOT to the outside “H” outlet of the

water valve. Tighten by hand, then tighten another 2/3 turn with pliers. Carefully connect the other inlet hose to the inside “C” outlet of the water valve. Tighten by hand; then

tighten another 2/3 turn with pliers. Do not crossthread or over-tighten these connections.

4.Connect the inlet hose ends to the HOT and COLD water faucets tightly by hand, then tighten another 2/3 turn with pliers. Turn the water on and check for leaks.

5.Carefully move the washer to its final location. Gently rock the washer into position. It is important not to damage the rubber leveling legs when moving your washer to its final location. Damaged legs can increase washer vibration. It may be helpful to spray window cleaner on the floor to help move your washer into its final position.

NOTE: To reduce vibration, ensure that all four rubber leveling legs are firmly touching the floor. Push and pull on the back right and then back left of your washer.

NOTE: Do not use the dispenser drawer or door to lift the washer.

NOTE: If you are installing into a drain pan, you can use a 24-inch long 2x4 to lever the washer into place.

PFWS4605, PFWH4400, PFWH4405, PFWS4600 specifications

The GE PFWS4600, PFWH4405, PFWH4400, and PFWS4605 models represent a range of efficient and technologically advanced washing machines designed to meet the needs of modern households. These models are characterized by their innovative features, user-friendly interfaces, and energy-efficient performance, making laundry day more manageable for families and individuals alike.

One standout feature of these GE washing machines is their advanced cleaning technologies. Each model incorporates GE’s Smart Wash technology, which uses sensors to automatically adjust the wash cycle based on load size and soil level, ensuring optimal cleaning while conserving water and energy. This feature not only enhances cleaning performance but also provides peace of mind by reducing the environmental footprint of laundry.

Another notable characteristic is the capacity offered by these models. With generous drum sizes, such as 4.6 cu. ft. in the PFWS4600 and PFWS4605 models, users can wash larger loads in a single cycle, making it particularly beneficial for busy households or those with heavy laundry needs. This increased capacity helps to save time and energy, allowing users to tackle larger loads without multiple cycles.

The PFWH4405 and PFWH4400 models also come with a variety of wash cycles and options, catering to specific fabric care. From delicate to bulky items, users can select the appropriate cycle to ensure their garments are treated gently while still achieving a thorough clean. The addition of features like steam cleaning helps to remove tough stains and allergens, providing a deeper clean without the need for harsh chemicals.

Users will appreciate the convenience offered by these models, which include features such as a programmable delay start, allowing users to set the washing machine to run at their convenience. Additionally, the user-friendly control panel features intuitive settings and an LED display, making it easy to select the desired wash cycle.

In terms of energy efficiency, these GE washing machines are designed to meet or exceed ENERGY STAR standards, ensuring that they consume less water and electricity compared to traditional models. This not only contributes to cost savings but also aligns with environmentally friendly practices.

Overall, the GE PFWS4600, PFWH4405, PFWH4400, and PFWS4605 models stand out in the competitive laundry appliance market. With their combination of advanced cleaning technologies, ample capacity, and energy-efficient operation, they provide smart solutions for all laundry needs, making them a reliable choice for consumers.