Installation clearances
■The location must be large enough to allow the washer door to be fully opened.
■Additional spacing should be considered for ease of installation and servicing. The door opens more than 90°, and it is not reversible.
■Additional clearances might be required for wall, door, and floor moldings.
■Additional spacing of 1" (25 mm) on all sides of the washer is recommended to reduce noise transfer.
■Companion appliance spacing should also be considered.
Washer Dimensions
| 27" |
501/4" | (686 mm) |
(1276 mm)
36"
(914 mm)
301/2"
(775 mm)
Recommended spacing for custom undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
2" (50 mm) |
|
|
36" min. |
|
|
(914 mm) |
|
|
1" | 27" | 1" |
(25 mm) | (686 mm) | (25 mm) |
Recommended spacing for recessed or closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
|
| 3" |
|
| (76 mm) |
48" | 48 in.2 |
|
(310 cm2) |
| |
(1220 mm) |
|
|
| 24 in.2 | 3" |
| (155 cm2) | |
|
| (76 mm) |
1" |
|
|
|
|
|
| 301/2" |
|
|
| 4" |
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
| ||||||||||
(25 mm) | (775 mm) |
|
| (102 mm) | ||||||||||
AB
A. Side view - closet or confined area
B. Closet door with vents
Recessed or closet installation - Washer on pedestal
|
|
|
| 38" min. | |
|
|
|
| (965 mm) | |
1" | 27" | 1" | 1" | 301/2" | 4" |
(25 mm) | (686 mm) | (25 mm) | (25 mm) | (775 mm) | (102 mm) |
| A |
|
| B |
|
| A. Recessed area |
|
|
| |
| B. Side view - closet or confined area |
| |||
4