Wl_itest Whites
This cycle introduces liquid chlorine bleach to the load at the proper time for improved whitening of your heavily soiled white fabrics. Cycle combines
Heavy Duty
Use this cycle for heavily soiled cotton or sturdy items. Cycle combines
Normal
Use this cycle for normally soiled cottons and mixed fabric loads. Cycle combines
Casual/Wrinkle Free
Use this cycle to wash loads of
Express Wash
Use this cycle to wash a few lightly soiled items that are needed in a hurry. This short cycle combines
Bulky/Bedding
This cycle is designed for oversized items that do not easily absorb water, such as comforters, pillows and
NOTE: Due to the preset water level, using this cycle for items other than those described above will create an unbalanced load.
Sheets
Use this cycle for sheets, pillowcases and blankets. The wash action of this cycle is designed to help keep large items from tangling and bailing up.
IMPORTANT: For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel portion of the basket.
Colors/Towels
Use this cycle for lightly soiled, colored clothing or towels. This cycle uses medium speed wash action and high speed spin.
Delicate/Handwash
Use this cycle to wash lightly soiled special care garments or for items labeled as "Machine Washable Wool or Silk." (Check label instructions to make sure that the garment is washable.) This cycle uses
When washing
Garments are labeled "Handwash" because:
•The fiber construction may be sensitive to wash action.
•The fabric contains sensitive dyes that may bleed.
NOTE: Some "Handwash" items naturally shrink when washed. Keep this in mind when you purchase items labeled "Handwash." Items that shrink should be dried flat. When these items are still
wet, "block" them by gently stretching to the original measurements.
Rinse/Drain & Spin
The Rinse & Spin and Drain & Spin cycles are selected with the same button.
©
Rinse/Drain & Spin
Rinse & Spin
This option performs a rinse only followed by a
When to use Rinse & Spin:
•For loads that need rinsing only.
•For completing a cycle after the power has been off.
To use Rinse & Spin setting:
1.Press RINSE/DRAIN & SPIN button once. The Rinse & Spin
indicator light, along with the Spin Speed, Water Temperature and 2nd Rinse lights will glow. You may change the Spin Speed and Water Temperature modifiers only.
NOTE: A Rinse & Spin cycle time of approximately
24 minutes will appear in the Estimated Time Remaining display.
2.Press START.
Drain & Spin
An extra drain and spin may help shorten drying times for some heavy fabrics or
used for draining the washer after canceling a cycle or completing a cycle after a power failure.
To use Drain & Spin setting:
1.Press RINSE/DRAIN & SPIN button once. The Rinse & Spin indicator light, along with the Spin Speed, Water Temperature and 2nd Rinse lights will glow. You may change the Spin Speed modifier only.
2.Press 2nd RINSE to deselect Rinse & Spin. The 2nd Rinse
and Water Temperature lights will shut off to indicate that a Drain & Spin cycle has been selected.
NOTE: A Drain & Spin time of approximately 14 minutes will appear in the Estimated Time Remaining display.
3.Press START.
IMPORTANT: Water will dispense in the washer for a moment, the lid will unlock, lock again, and then the Drain & Spin cycle will continue. This is normal.
14