Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing.
9. Remove four screws retaining Spinner (Inner Tub). | 13. Remove Pressure Switch Hose from fitting on Outer |
10.After Spinner (Inner Tub) is removed, use Spanner | Tub. |
Wrench and Seal Nut tool to remove Seal Nut. |
|
14.Remove Suspension Springs using the spring
11. Remove gasket from Hub.removal tool. Be careful not to let Tub and Transmission assembly tip over.
12.Use Spanner Wrench to remove Hub.
24 | 16026502 | ©2005 Maytag Services |