Whirlpool AAV4000AW manual Select Load Size, Select Cycle and Water Temperature, Cottons Cycle

Using the Controls - 2 Speed Combo Models

STEP 1 STEP 2

Select LOAD SIZE

Determine the selected setting based on load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to Reset and then back to the desired setting.

WATER LEVEL SETTING	LOAD SIZE
Mini (select models)	1/4 Full
Medium	1/4 – 3/4
Super	3/4 – Full

Select Cycle and Water Temperature

To select a cycle and water temperature, push the control dial in (off position) and turn it to the right (clockwise) until the pointer is at the number of minutes and water temperature needed for the wash load in the COTTONS, WRINKLE-FREE FABRICS or DELICATES cycles. All rinses use cold water.

COTTONS Cycle

Used to wash Cottons and heavily soiled items.

WRINKLE-FREE FABRICS Cycle

Used to minimize wrinkles with a cool-down spray rinse following the wash.

Note: Items must circulate freely for best results.

3

DELICATES Cycle

Used for items requiring delicate wash action. The washer will fill, then agitate and soak alternately.

Note: In wash water temperatures below 60° F (16° C), detergents do not dissolve well or clean well. Care labels define cold water as up to 85° F (29° C).

B–38 16026502 ©2005 Maytag Services