Using the Controls – 4 Speed Select Models
STEP 1
Select Water Level
Determine the selected setting based on clothes load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation. On select models, the Infinite Water Level control allows you to select a specific setting or anywhere in between.
It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.
WATER LEVEL SETTING | LOAD SIZE |
Mini | 1/4 Full |
|
|
Small | 1/4 - 1/3 |
|
|
Medium | 1/3 – 1/2 |
|
|
Large | 1/2 – 2/3 |
|
|
Super | 3/4 – Full |
|
|
Note: Items must circulate freely for best results.
STEP 2
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water (select models) for rinsing.
WASH/RINSE | LOAD TYPE | |
TEMPS |
| |
Hot/Cold | White and heavily soiled, | |
items. | ||
| ||
Warm/Warm | Moderately soiled, colored items. | |
(select models) |
| |
|
| |
Warm/Cold | Moderately soiled, colored items; | |
most | ||
| ||
Cold/Cold | Brightly colored, lightly soiled | |
items; washable woolens. | ||
| ||
|
|
Automatic Temperature Control (A.T.C.) (select models) provides the optimal wash water temperature for cleaning. To save energy, this washer will regulate wash water temperatures by mixing hot and cold water to reach the proper water temperature.
WASH/RINSE | LOAD TYPE |
TEMPS |
|
These settings feature Automatic
Temperature Control:
ATC Hot/Cold, | Saves energy by adding cold water | |
to the hot water from your water | ||
ATC Warm/Cold | ||
ATC Warm/Warm | heater. Provides optimum cleaning | |
| at lower temperatures. | |
| May add hot water to the incoming | |
ATC Cold/Cold | cold water as the washer fills. This | |
assures that the water will be warm | ||
| ||
| enough to properly activate detergent. |
STEP 3
Select Wash/Spin Speed
Your washer has selectable wash and spin speed combinations.
WASH/SPIN | LOAD TYPE | |||
| SPEED |
| ||
| Regular |
| Sturdy fabrics needing maximum | |
| water extraction like jeans, towels | |||
Normal/Fast | ||||
and bedding | ||||
|
|
| ||
|
|
|
| |
Wrinkle Control | Sturdy fabrics needing a slower spin | |||
Normal/Slow | speed to reduce wrinkling, such as | |||
|
|
| dress shirts and dress pants | |
| Delicate |
| Delicate fabrics needing slower spin | |
| speed because of clothing | |||
Gentle/Slow | ||||
construction | ||||
|
|
| ||
| Handwash | Intermittent slow agitation and soak | ||
Ex. Gentle/Slow | to gently wash the most delicate items | |||
|
|
|
|
Note: In wash water temperatures below 60° F, detergents do not dissolve well or clean well.
7
16026502 | ©2005 Maytag Services |