Whirlpool AAV4000AW manual Small 1/2 Full Medium 3/4 Full Large

Using the Controls - 3 Speed Combo Models

STEP 1

Select Water Level

Determine the selected setting based on clothes load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.

WATER LEVEL SETTING	LOAD SIZE
Ex. Low	1/4 Full
(select models)
Small	1/4 – 1/2 Full
Medium	1/2 – 3/4 Full
Large	3/4 – Full

Note: Items must circulate freely for best results.

STEP 2

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water (select models) for rinsing. Use the chart below as a guide.

WASH/RINSE	LOAD TYPE
TEMPS
Hot/Cold	White and heavily soiled, color-fast
	items.
Warm/Warm	Moderately soiled, colored items.
(select models)
Warm/Cold	Moderately soiled, colored items;
	most wrinkle-free items.
Cold/Cold	Brightly colored, lightly soiled
	items; washable woolens.

Note: In wash water temperatures below 60° F, detergents do not dissolve well or clean well. Care labels define cold water as up to 85° F.

3

B–52 16026502 ©2005 Maytag Services