Whirlpool AAV4000AW Using the Controls 3 Speed Combo with Stain Cleaner Models, Select Signal

Using the Controls - 3 Speed Combo with Stain Cleaner Models

STEP 1

Select Signal

End of Cycle Signal

When the cycle is complete, a signal will sound several times. The End of Cycle Signal volume is adjustable.

To adjust the volume, select any setting between OFF and LOUD.

STEP 2

Select Water Level

Determine the selected setting based on clothes load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.

WATER LEVEL SETTING	LOAD SIZE
Ex. Low	1/4 Full
Small	1/4 - 1/3
Medium	1/3 – 1/2
Large	1/2 – 2/3
Extra Large	3/4 – Full

Note: Items must circulate freely for best results.

5

STEP 3

Select Wash/Spin Speed

Your washer has selectable wash and spin speed combinations.

WASH/SPIN	LOAD TYPE
SPEEDS
Normal/Normal	Sturdy fabrics needing maximum
	water extraction.
Normal/Slow	Sturdy fabrics needing a slower
	spin speed because of wrinkling.
	Delicate fabrics needing slower
Slow/Slow	wash and spin speed because of
	clothing construction.

STEP 4

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water for rinsing. Use the chart below as a guide.

WASH/RINSE	LOAD TYPE
TEMPS
Hot/Cold	White and heavily soiled, color-fast
	items.
Warm/Cold	Moderately soiled, colored items;
	most wrinkle-free items.
Cold/Cold	Brightly colored, lightly soiled
	items; washable woolens.

B–54 16026502 ©2005 Maytag Services