American Dryer Corp manual ML-410 Sprinkler Option Temperature Controller Settings

ML-410

Sprinkler Option Temperature Controller Settings

NOTE: Refer to Controller’s User’s Manual for further information on controller options.

Message	Message	Settings
Display	Description
SP	TEMPERATURE	575º F OR 301.6º C
	SET POINT
ALHi	ALARM HI	575º F OR 301.6º C(NOTE: ADJUST SAME AS SP)
InP	INPUT DEVICE	P 385 = RTD INPUT
F-C	º F OR º C	SELECT TYPE REQUIRED(FAHRENHEIT OR CELSIUS)
dpt	DECIMAL POINT	0, NO DECIMAL POINT
InPt	INPUT FAULT TIMER	0.2
SPL	SET POINT LOW	500 (SETTING CAN NOT BE LOWER)
SPH	SET POINT HIGH	700 (SETTING CAN NOT BE HIGHER)
SPSt	SET POINT STATE	rE (REVERSE ACTION)
SPOL	SET POINT OUTPUT	0% (NOT USED)
	LOW LIMIT
SPOH	SET POINT OUTPUT	100% (NOT USED)
	HIGH LIMIT
SPLP	SET POINT LAMP	0 OFF (LAMP OFF WHEN OUTPUT IS ON)
AL	HIGH ALARM ONLY	Hi
ALt	ALARM TYPE	Abs (ABSOLUTE ALARM)
ALrE	ALARM RESET	OnOf (AUTOMATIC RESET)
ALPi	ALARM POWER	OFF (ALARM INHIBIT IS OFF)
	INTERRUPT
ALiH	ALARM INHIBIT	OFF (ALARM INHIBIT IS OFF)
ALSt	ALARM OUTPUT	CLOS
	STATE	(CLOSES CONTACTS AT ALARM SET POINT)
ALLp	ALARM LAMP	O ON (ALARM LAMP IS ON WHEN ALARM
		CONTACT IS CLOSED)
SECr	SECURITY CODE	FULL SECURITY - SET TO 110 (DISPLAYED AS 1) "VIEW ONLY"
		NO SECURITY - SET TO 111 (DISPLAYED AS 4)
		"ALL FEATURES UNLOCKED"

62