Setting a Wash Programme, Options Description

Step 1

OPERATING INSTRUCTIONS CONT.

SETTING A WASH PROGRAMME

If there are no words on the touchscreen, open the door, touch any key (except off), or touch the screen to “wake” the controls.

Press "Start/Pause" or	Press "Start/Pause" or	Press "Start/Pause" or	Press "Start/Pause" or
change your selections below.	change your selections below.	change your selections below.	change your selections below.

fabric

options

Fabric

Wash Temp.

Spin Speed

cottons

end chime medium

cottons

reduced

coldprogram chime med.

program chime med.

wash temp

cottons

program chime med.

500 rpm

800 rpm

wash temp

ironing

wash temp

60°C

spin speed

delicates/

woollens

30 °C

40 °C

600 rpm

900 rpm

synthetics

spin speed

1000 rpm

spin speed

1000 rpm

700 rpm

1000 rpm

quick wash

50 C

60 C

programmes

Fabrics – Select “Fabric” to

select the appropriate fabric

Home Screen – You may setting. immediately start a cycle using the

default wash settings or choose “More Programmes” for other types of programmes. If you wish to modify the wash cycle, the following variables can be changed:

Wash Temp – Select “Wash Temp” to select the appropriate wash temperature.

Spin Speed – Select “Spin Speed” to select the appropriate spin speed.

More Programmes

Options

rinse & spin

spin only

pre-

soak

final

spin

remind

chime

end chime

off

pre-wash

economy

off

medium

automatic dispenser &

off

delay wash

short programme

machine cleaning

extra rinse

1/2 load

off

favourites

continue

More Programmes – Select “More Programmes”

to choose between the following four options: Rinse and Spin (allows up to four rinses)

Spin Only

Automatic Dispenser and Machine Cleaning

Favourites

Options – This has two screens that has many different options which can be toggled on and off. To access the additional screen press the arrow key in the upper right corner of the screen. Press “Continue” to return to the review screen. Below is a table showing all the options and a brief description of each one.

Step 2

If you are satisfied with the selections, press the Start/Pause touchpad to begin the programme.

As you use the touchscreen, if

you feel you are lost, press

Back or Home.

NOTE: Not all Wash Temps, Spin Speeds, and options will be available for the various fabric selections. Some will appear “greyed out.”

Options	Description

Add a Pre-wash	Adds a pre-wash. The Pre-wash compartment is flushed during this
	step, followed by the main wash compartment during the main wash.

Add a Pre-soak period	Adds a standing soaking period of 15 minutes before the main
	programme sequence starts.

Add Extra Rinse	Adds an extra rinse at the end of the normal programme’s rinse
	sequence, and just before the final spin.
No Final Spin	Will not advance the programme into a final spin. Clothes load will be
	wet at the end of the programme.

Economy	Limits all wash fills to "Low" and rinse fills to "Medium" and limits the
	wash water temperature to 40C regardless of selection. Cancels Pre-
	wash if chosen.
1/2 Load	Reduces water levels by one setting from “Medium” to “Low” and/or
	from “High” to “Medium”.
Remind Chime	Chimes at the end of the programme, every 5 minutes for up to
	2 hours.
End Chime	Chimes once when wash programme is complete.

Short Programme	Shortens programme time.
Delay Wash	Sets the machine to start at a predetermined delay time set by the user.
	Delay can be set up to 12 hours and 45 minutes, in 15 minute increments.