GE UPGT650 What to do if YOU Smell GAS, Clear the room, building or area of all occupants

Page 2

Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death.

Do not store or use gasoline or other

Installation and service must be

flammable vapors and liquids in the

performed by a qualified installer,

vicinity of this or any other appliance.

service agency or the gas supplier.

 

 

WHAT TO DO IF YOU SMELL GAS:

Operating

1

2

3

Do not try to light a match, or cigarette, or turn on any gas or electrical appliance.

Do not touch any electrical switch;

do not use any phone in your building.

Clear the room, building or area of all occupants.

4

5

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions carefully.

If you cannot reach your gas supplier, call the fire department.

Installation

Instructions

Consumer Support Troubleshooting Tips

California Safe Drinking Water and Toxic Enforcement Act

This act requires the governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels.

Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized further by properly venting the dryer to the outdoors.

2

Image 2
Contents Dryers What to do if YOU Smell GAS Clear the room, building or area of all occupantsProper Installation Ge.comYour Laundry Area When not Using Your Dryer About the dryer control panel Control PanelTime Dry PowerCycles Dry LevelTo recall your stored MY Cycles combination To store a MY Cycles combination of settingsMy Cycles Wrinkle Care SignalAbout cycle options Lock Estimated Time RemainingScrew Changing the Drum Lamp Dryer FeaturesUsing the Drying Rack Fabric Care Labels Loading and Using the DryerSorting and Loading Hints Dry LabelsSafety Care and Cleaning of the DryerBefore YOU Begin For Your SafetyDPGT650 and UPGT650 For GAS Models onlyUnpacking Your Dryer Installation InstructionsDryer Dimensions Installation Instructions Location of Your Dryer Bathroom or Bedroom InstallationShutoff Valve Dryer GAS Supply Connection Installation Instructions Connecting a GAS DryerGAS Requirements GAS SupplyConnecting the Dryer to the GAS Supply Connecting the Dryer to the GAS SupplyTest for Leaks Electrical Requirements For GAS DryersElectrical Connection Information for Electric Dryers For 3-wire and 4-wire Connection Installation Instructions Connecting AN Electric DryerConnecting Dryer Power Cord Grounding InstructionsFor 3-wire Connection only For 4-wire Connection onlyTools and Materials YOU will Need to Install Exhaust Duct Exhaust System ChecklistUsing Flexible Metal Duct for Transition Venting Do notEquivalent Installation Instructions Exhausting the DryerExample only Duct PiecesNumber Ducting Component Equivalency ChartTransition Ducting Total Ductwork LengthDryer Exhaust to Side or Bottom of Cabinet Using duct elbows will prevent duct kinking and collapsingStandard Rear Exhaust Level the Dryer Plug in DryerServicing Installation Instructions Final SetupDryer Startup Remove Door Remove Filler PlugsRemove Handle Reverse Door CatchRemove Hinges and Rehang Door Installation Instructions Reversing the Door SwingReverse Handle Following are normal sounds you may hear Before you call for service…Normal Operating Sounds GE Dryer Warranty. For customers in the United States Warrantor General Electric Company. Louisville, KYOne Year What Is Not Covered in CanadaFor The Period Of We Will Replace Schedule Service Consumer SupportFonctionnement Inscrivez ici les numéros de modèle et de sérieInflammables à proximité de cet appareil Être effectuées par un installateur qualifié’essence ou autres vapeurs ou liquides Ou de tout autre électroménager Fournisseur de gazUNE Installation Adéquate Autour DE Votre Sécheuse Conservez CES Directives Le panneau de contrôle de votre sécheuse Panneau de contrôleDry Level niveau de séchage Power alimentationTime Dry séchage minuté My Cycles mes cycles Start mise en marcheWrinkle Care défroisser Signal alerteOptions de cycle More Time plus de tempsMesures de Lock verrouillageUtilisation de la grille de séchage Vis Remplacement de la lampe de tambourCaractéristiques Étiquettes de séchage Chargement et utilisation de la sécheuseÉtiquettes d’entretien de tissu CulbutageSécurité Fonctionnement Pour Votre Sécurité DPGT650 et UPGT650Avant DE Commencer Pour LES Modèles À GAZ UniquementDéballage DE Votre Sécheuse Instructions d’installationDimensions DE LA Sécheuse Exigences Relatives À UNE Installation Encastrée Votre sécheuse est homologuée pourVanne d’arrêt Dans LE Commonwealth DU Massachusetts Exigences Relatives AU GAZAlimentation EN GAZ Raccordement DE LA Sécheuse À L’ALIMENTATION EN GAZ Raccordement DE LA Sécheuse À L’ALIMENTATION EN GAZ suiteDétection DES Fuites Avertissement N’utilisezAvertissement Cette Les risques d’incendie, de chocs électriques ou de blessure Avertissement Ne pliez pas Instructions DE Mise À LA TerrePour un raccordement à 4 fils Uniquement Branchement DU Cordon D’ALIMENTATION DE LA Sécheuse suiteAvertissement Pour Liste DE Vérification DU Système D’ÉVACUATIONNE Faites PAS ’ÉCRASEZ PAS ou ne pliez pas le conduitPièces DE Conduit Instructions d’installation Évacuation DE LA Sécheuse suiteExemple Uniquement Longueur = ÉquivalenteMurales Tableau D’ÉQUIVALENCE DES ConduitsIntérieur MURS/PLAFONDS Évacuation Arrière Standard Évacuation DE LA Sécheuse SUR LE Côté OU Fond DU PlacardMettez DE Niveau LA Sécheuse Branchez LA SécheuseDémarrage DE LA Sécheuse Instructions d’installation Installation Finale suiteMaintenance Inversez LE Loquet DE LA Porte Enlevez LA PoignéeEnlevez LA Porte Enlevez LES Charnières ET Remontez LA Porte suite Inversez LA PoignéeEnlevez LES Charnières ET Remontez LA Porte Il est normal d’entendre les bruits suivants Avant d’appeler un réparateur…Bruits normaux de fonctionnement Page Garantie de votre sécheuse GE Ce qui n’est pas couvertSoutien au consommateur Service de réparations Prolongation de garantie
Related manuals
Manual 72 pages 39.76 Kb

UPGT650 specifications

The GE UPGT650 and DPGT650 are advanced gas turbine models developed by General Electric, known for their cutting-edge technology and high efficiency. Designed primarily for power generation and industrial applications, these gas turbines represent the latest in innovation and performance in the energy sector.

At the heart of the UPGT650 is its high-efficiency design that optimizes fuel consumption while reducing emissions. This gas turbine operates at a high pressure ratio, which significantly enhances its overall efficiency, making it a preferred choice for operators seeking to minimize operational costs while maximizing output. The UPGT650 boasts a fuel flexibility feature, enabling it to run on various fuels, including natural gas and liquid fuels, catering to different operational needs and geographical conditions.

The DPGT650 variant, specifically developed for applications requiring high reliability and performance in distributed power generation, offers similar efficiency benefits while providing enhanced operational flexibility. Its modular design allows for easy maintenance and upgrades, which is crucial for facilities needing to adapt to changing energy demands and regulatory environments.

Both turbine models incorporate advanced technologies such as advanced cooling systems to maintain optimal operating temperatures and enhance durability. The utilization of advanced materials in the turbine blades contributes to their ability to withstand high thermal and mechanical stress, further improving performance longevity. Additionally, the turbines are equipped with sophisticated control systems that enable operators to achieve precise load management and efficient power dispatch.

A critical characteristic of the UPGT650 and DPGT650 is their environmental performance. These turbines are engineered to meet stringent emissions standards, effectively reducing CO2 and NOx emissions. This makes them suitable for regions with strict environmental regulations, appealing to companies focused on sustainability and environmental responsibility.

In summary, the GE UPGT650 and DPGT650 gas turbines stand out in the energy landscape for their efficiency, reliability, and environmental performance. With features like fuel flexibility, advanced cooling technologies, and modular design, they are poised to meet the evolving demands of the power generation industry, driving the transition towards cleaner and more efficient energy systems.