Follow the progress of your dryer with the drying Status indicator lights.
WET @
Select the drying cycle that matches the type of load you are drying. See Auto Dry chart or Manual Preset Cycle Settings chart.
AUTO DRY | CASUAL DEUCATE | MANUAL |
CYCLES |
| CYCLES |
DAMP @
COOLDOWN@
CLOTHESDRY @
WRINKLE GUARD @
CHECK LINT SCREEN@
CONTROLLOCKED@
NORMAL -
JEANS
BULKY/ BEDDING
TIMED DRY
= EXPRESSDRY
* TOUCH UP
HEAVY DUTY
Wet
The Wet light glows at the beginning of Auto Dry or Manual cycles if a wet item is detected.
•In an Auto Dry Cycle, if a wet item is not detected after
5 minutes, the dryer goes directly into Cool Down and the Cool Down and WRINKLE GUARD_qndicators glow, if selected.
•In a Manual Cycle, if a wet item is not detected, the dryer will continue to run for the length of time selected, but the Wet light will not glow.
Damp
The Damp light glows in an Auto Dry Cycle when the laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See "Options."
Cool Down
The Cool Down light glows during the cool down part of the cycle. Laundry cools for ease in handling.
Clothes Dry
The Clothes Dry light glows when the drying cycle is finished. This indicator stays on during WRINKLE GUARD ®.
WRIN KLE GUARD _
The WRINKLE GUARD _ light glows when this option is selected. This indicator stays on with Clothes Dry.
Check Lint Screen
The Check Lint Screen light reminds you to check the lint screen. The light glows when the user selects a cycle. It goes out when the door is opened, Start is pressed, or after 5 minutes elapses.
Control Locked
The Control Locked light glows when this option is enabled.
Indicator lights
Other indicator lights show Cycle, Options, Modifiers and End of Cycle settings selected. The display shows the estimated or actual time remaining.
Auto Dry Cycles allow you to match the cycle to the load you are drying. See the following Auto Dry Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavy fabrics such as cotton towels or bedspreads.
Bulky/Bedding
Use this cycle to get medium heat for drying large items that
require long drying times, such as jackets, comforters and pillows. Rearrange the load when the Damp Dry Signal sounds.
This will aid in the drying process. The Damp Dry Signal is preset to ON. See "Options."
Jeans
Use this cycle to get medium high heat for drying denims.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such as work clothes.
Casual
Use this cycle to get low heat for drying
Delicate
Use this cycle to get
15