Auto Dry Preset Cycle Settings |
| Manual | Preset Cycle | Settings |
| |||
Auto | Dry Cycles | Temperature | Time* | Manual | Cycles | Temperature | Default Time | |
Load | Type |
| (Minutes) | Load Type |
|
| (Minutes) | |
HEAVY DUTY | High | 44 | TIMED | DRY |
| High | 40 | |
Heavyweight, towels |
|
| Heavyweight, | bulk, |
|
| ||
|
|
|
| bedspreads, | work clothes |
| ||
BULKY/BEDDING | Medium | 64 | |
Jackets, comforters, |
| ||
pillows |
|
|
|
JEANS |
| Medium High | 54 |
Denim jeans, jackets |
| ||
NORMAL |
| Medium | 41 |
Corduroys, | work | clothes |
|
CASUAL |
| Low | 36 |
Permanent | press, |
|
|
synthetics |
|
|
|
DELICATE |
| Extra Low | 22 |
Lingerie, blouses, |
|
| |
washable | knit fabrics |
| |
EXPRESS DRY TM | High | 27 | |
Small loads |
|
| |
TOUCH | UP | Medium High | 20 |
Remove | wrinkles |
|
|
You can customize your cycles by selecting options.
@
DA;vIPDRYSI{AA
*Estimated Time with Auto Dry Level (Normal) setting. Time will vary depending on load type and load size.
Use Manual Cycles to select a specific amount of drying time and a drying temperature. When a Manual Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing More Time or Less Time. See "Changing Cycles, Options and Modifiers."
Timed Dry
Use this cycle to complete drying if items are still damp after an Auto Dry Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting.
EXPRESS DRY TM
Use this cycle for drying small loads or loads that need a short drying time.
Touch Up
Use this cycle to remove wrinkles from items, such as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.
WRINKLE®UARD
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to prevent overdrying or remove partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a mixed load or large items in the "Bulky/Bedding" cycle. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process.
For the "Bulky/Bedding" cycle, the Damp Dry Signal is preset to ON.
NOTE: The Damp Dry Signal is available only with the Auto Dry Cycles.
WRINKLE GUARD _
WRINKLE GUARD _ prevents wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period.
•Press WRINKLE GUARD _ to get up to 21/_hours of
•Stop WRINKLE GUARD ® at any time by pressing WRINKLE GUARD _ or opening the dryer door.
•For the Casual Auto Dry Cycle, WRINKLE GUARD _ is preset to ON. The other Auto Dry Cycles will retain the WRINKLE GUARD _ setting. For example, if you select WRINKLE GUARD _ in the Normal cycle, WRINKLE GUARD ® will be on the next time you select the Normal cycle.
NOTE: If you do not select WRINKLE GUARD ®, the dryer stops after cool down.
16