Haier RDE350AW Installation Instructions, Tools Needed, Additional Parts Required, Risk of Fire

INSTALLATION INSTRUCTIONS

WARNING

Risk of Fire

Clothes dryer installation must be performed by a qualied i nstaller.

Install the clothes dryer according to the manufacturer's instructions and local codes.

To reduce the risk of severe injury or death, follow all installation instructions.

TOOLS NEEDED

•Phillips Screwdriver

•Flat-Blade Screwdriver

•Channel-Lock Adjustable Pliers

•½" Open-End Wrench

•Carpenter’s Level

•Measuring Tape (12 ft. [3.7 m] min.)

For gas installations only:

•Pipe Wrench

•2 Adjustable Wrenches

ADDITIONAL PARTS REQUIRED

•4" (10.2 cm) Rigid or Flexible Metal Exhaust Ducting

•Vent Clamps

•Duct Tape

•Power Cord (US Electric Dryer Only)

-A power supply cord kit must be purchased to meet local electrical codes. The dryer must use a 3 or 4-wire NEMA 14-30 or 10-30 type SRDT or ST (as required) power supply cord rated at 120/240 volt AC minimum,

30 amp, with 3 open-end spade lug connectors with upturned ends or closed loop connectors and marked for use with clothes dryers.

-UL Listed Strain Relief

•Gas Hookup Parts (Gas Dryer Only)

-!" NPT Elbow

-!" NPT Flare Adapter Fitting

-!" Flexible Gas Connector

-Pipe-Joint Compound

•Mobile Home Installation Kit (Gas Dryer for Mobile Home Only)

6