JVC KD-SH9102 Selecting the dimmer mode, Select From- To to set the timer for the dimmer mode

ENGLISH

Selecting the dimmer mode

You can dim the display at night automatically or as you set the timer.

When shipped from the factory, Auto Dimmer mode is activated.

Note:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, select any other than “Auto.”

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 47 and 48.)

SEL

2 Press number button 3 to select “DISP”—Display category of the PSM settings.

4 Set the dimmer mode as you like.

ATT

•	Auto:	Activates Auto Dimmer.
		When you turn on the car
		head lights, the display
		automatically dims.
•	Off:	Cancels Auto Dimmer.
•	On:	Always dims the display.

•Time Set: Used to set the timer for the dimmer mode.

Note:

Selecting “Auto” or “Time Set” may change the display pattern to the “Negative” or “Positive” pattern if “LCD Type” is set to “Auto.”

•If you select “Time Set,” go to the following steps to set the timer.

•If you select any other than “Time Set,” go to step 7 to finish the setting.

5 Select “From– To” to set the timer for the dimmer mode.

1 2 3 4 5 6

3 Press ¢	or 4 to select
“Dimmer.”	6 Set the timer.

1 Turn the control dial to select the start time.

2 Press ¢ once.

3 Turn the control dial to select the end time.

7 Finish the setting.

SEL

50