JVC Comprehensive Guide to BBE Settings and Input Level for KD-SH9101

ENGLISH

To make sounds natural—BBE:

BBE Digital* is a new digital processing method to restore the brilliance and clarity of the original live sound in recording, broadcasts, etc.

When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high-frequency sounds to take longer to reach the ear than low frequency sounds. BBE Digital adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that all frequencies reach the listener’s ears at the proper time.

To adjust the input level of each source

—Vol Adj:

This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.

Once you have made an adjustment, it is memorized, and you will not need to adjust the volume level each time you change the source.

Adjust to match the input level to the FM sound level.

Select the effect level.

ATT

To increase the level.

ATT

To increase the level.

To decrease the level.

To decrease the level.

If the (INPUT OVER) indicator appears

BBE OffBBE 1BBE 2BBE 3 (Canceled)

As the number gets higher, the effect level becomes stronger.

When shipped from the factory, the effect level is set to “BBE Off” (BBE Digital is canceled).

on the display, and sounds are distorted

The input level through the external component (LINE IN) is set at a high level (more than 1.5 Vrms).

If this happens, adjust the output level on the connected component so that the

(INPUT OVER) indicator will not appear.

Note:

If “V.CANCEL” is selected for the DSP mode, you cannot change the BBE level.

*Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound , Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

(INPUT OVER) indicator

38