JVC KD-SH9104, KD-SH9103, KD-SH9102 Select User, Press Disp D to resume Source indication screen

	7	To delete more files, repeat from steps 5 and
ENGLISH
		6.
	8	Press DISP (D) to resume the	D
		source indication screen.
			DISP

Activating the downloaded images and animations

To activate the animations stored for opening and ending screens

After the unit turns on or before the unit turns off, you can see preset animations on the display. These are called opening screen and ending screen. You can use your own edited animations for these opening and ending screens.

•Opening and ending screens will not be shown if the “KeyIn CFM” setting is set to “Short" or “Off.” (See page 48).

•If no animation is stored in “PowerOn” and

“PowerOff,” “Opening” and “Ending” will not be selected as a PSM item.

3 Select “Opening” (opening screen setting) or “Ending” (ending screen setting).

Ex. When you select “Opening”

4 Select “User.”

ATT

•Default: Factory-preset animation is used.

•User: Your own edited animation is used.

5 Finish the setting.

SEL

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 47 and 48.)

SEL

2 Press number button 1 to select “MOVIE”—Movie category of the PSM settings.

1 2 3 4 5 6

To activate the graphic screen using either picture or movie

Using this setting, you can change the graphic displays. These graphic screen appears if no operation is done for about 20 seconds.

•If no image is stored in “Picture,” or no animation in “Movie,” “UserPict.” will not be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 47 and 48.)

SEL

The “Graphics” setting screen appears on the display.

44