JVC KD-SH9101 Audio CD or a CD Text MP3 or a WMA disc, Display indications when inserting an

• Display indications when inserting an	• Display indications when inserting an
audio CD or a CD Text:	MP3 or a WMA disc

1 2 3 4 1 2

5 6 3 4 5

ENGLISH

1Total track number

2Total playback time of the disc

3Disc title/performer (if no title is recorded or

assigned*, “No Name” appears.)

4Track title (if no title is recorded, “No Name”

appears.)

5Current track number

6Elapsed playing time of the current track

*If a name has been assigned to the audio CD (see page 51), it will be shown on the display.

6 7 8

1Total folder number

2 Total track number

3 Disc type—MP3 or WMA

4 Album name/performer (or folder name when “Tag” is set to “Off”—see page 49, or when no Tag is recorded)

5 Track title (or track name when “Tag” is set to “Off”—see page 49, or when no Tag is recorded)

6 Current folder number

7 Current track number

8 Elapsed playing time of the current track

Notes:

•When a disc is already in the loading slot, selecting “CD” as the source starts disc play.

•The unit cannot read or play an MP3 track without the extension code <mp3>, and a WMA track without the extension code <wma>.

•When a disc is inserted upside down, the disc automatically ejects.

•If you change the source, playback also stops (without ejecting the disc).

Next time you select “CD” as the source, disc play starts from where it has been stopped previously.

To return the control panel to its previous

position, press 0 again.

•If you keep the loading slot open for about 1 minute, (beeps sound when the “Beep” setting is turned “On”—see page 49) the control panel returns to its previous position.

Be careful not to get the disc or your finger caught in between the control panel and the unit.

Note:

If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)

23