JVC KD-SH9104 manual Storing DAB services in memory, Tuning in to a preset DAB service, Comes on

Page 64

ENGLISH

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.

1 Select the DAB tuner.

 

Each time you press the button,

SRC

the source changes as described

 

on page 7. When you select a

 

source, the power automatically

 

comes on.

2 Select the DAB band (DAB1, DAB2, or DAB3).

5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.

1

The display pattern automatically changes to the initial display pattern and the preset number flashes (then the previous display

SRC

DAB1

DAB3 DAB2

1Press and hold SRC for more than 1 second.

The band indication on the display starts flashing.

2Within about 5 seconds (wile the band indication is flashing), press SRC again. Each time you press the button, the band changes.

pattern resumes).

6 Repeat the above procedure to store other DAB services into other preset numbers.

Notes:

• You can only preset primary DAB services. If you

store a secondary service, its primary service will

be stored instead.

3 Tune in to an ensemble you want.

4 Select a service of the ensemble you want to listen to.

Press 5 (up) to select the next service.

Press (down) to select the previous service.

• A previously preset DAB service is erased when a

new DAB service is stored in the same preset

number.

Tuning in to a preset DAB service

You can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, “Storing DAB services in memory.”

1 Select the DAB tuner.

Each time you press the button,

SRCthe source changes as described on page 7. When you select a source, the power automatically comes on.

64

Image 64
Contents KD-SH9104/KD-SH9103 KD-SH9102/KD-SH9101 Position And Reproduction Of Labels How to reset your unitSee Contents Control panel Location of the ButtonsIllumination Navigation for easy operations Remote controller FM/DABPreparing the remote controller Installing the batteryRemove the battery holder Place the batteryTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsSetting the clock Canceling the displayDemonstration Standard Selecting the level meterMeter Radio Operations Searching a station automatically Auto searchSelect the band FM1 3, AM Start searching a station Press ¢ to search stations of higher frequenciesSelect the band FM1 3, AM Searching a station manually Manual searchPress SRC source FM station automatic preset SSM Storing stations in memoryReceive Start SSMManual preset Selecting a preset station directlyTune in to a station in this example, of 92.5 MHz Press and hold the number buttonSelecting a preset station using the preset station list Select the number 1 6 for the preset station you wantInitial display pattern Programme station PS name is Emphasized*3What you can do with RDS RDS OperationsTo use Network-Tracking Reception Using TA Standby Reception PTY Stnby standby setting screen Appears on the displayReception AlternatelyUsing PTY Standby Reception To select your favorite PTY code for PTY Standby ReceptionTo set PTY Standby Reception Select one of the twenty-nine PTYSearching your favorite programme To store your favorite programme typesTo store your favorite programme types, see To search your favorite programme type, seeSelect one of the twenty-nine PTY codes. See Ex. When Rock M is selectedStart PTY search for your favorite programme Automatic clock adjustment Setting the TA volume levelTo activate programme search, follow the procedure below PTY codes Same programme can be received on different frequenciesCD Operations Playing a discAbout MP3 and WMA discs To stop play and eject the discDisplay indications when inserting an Display indications when inserting anAudio CD or a CD Text MP3 or a WMA disc To return the control panel to its previousWhat is ImageLink Locating a particular portion on a trackTo fast-forward or reverse the track To go to the next or previous tracksLocating a track on a disc How to go to the desired track quicklyTo go to a track quickly To go to a folder directly Locating a folder on a discTo skip to the next or previous folder Only on the remote controller To select a track and start playback To select a folder and start playbackFolder Select the number 1 6 for the trackSelecting playback modes To play back tracks repeatedly Repeat PlayRandom Disc Random Off Random Folder Random Disc Random OffProhibiting disc ejection To play back only intros Intro ScanWhile playing an MP3 or a WMA disc Initial display While playing an audio CD or a CD Text disc Initial displayDSP Operations Selecting the DSP modesAdjust the DSP effect level-1, 2, or To make further precise settings for the DSP modesPress SEL select once to show the DSP mode selection screen Further precise setting screen To go back to the DSP mode selection screenPress number button 6 to enter Select your listening seats positionEqualizer Operations One of the sound modes listed onDisplay Press SEL select twice to show the sound selection screenEnter the sound adjustment mode Store the adjustment you madeIf you want to cancel the adjustment Sound Adjustments SettingsAdjust the level Canceled Vol Adj BBE Sub OutBBE Off BBE 1 BBE 2 BBE 3 Canceled To adjust the input level of each source Vol AdjTo make sounds natural-BBE To increase the levelInstall / Start the program Graphic DisplaysImport the images Retouch and edit the imagesDownloading images and animations Press Mode M after the disc is detectedPress number button 6 to show the download selection screen If you want to cancel the procedure, press File nameList As follows Folder nameDeleting unwanted files To delete all the stored files at a timeSelect a file you want to download If it is OK, press number button 1 to start downloadingTo delete the file stored PowerOn, PowerOff, To delete the stored files for Picture one by oneAnimation appears, and the unit asks you Delete OK? Press the number buttons for the file you want to deleteSelect User Press Disp D to resume Source indication screenTo cancel all graphic displays, select Off To select a still image for graphic display-User PictureSelect UserMovie, UserSlide, or UserPict Select UserPictBasic Procedure AdjustAdjust the PSM item selected Other Main FunctionsPreferred Setting Mode PSM items To adjust the display contrast level Contrast To show the graphics on the display- GraphicsTo select the source animation on the display-KeyIn CFM To select the scroll mode-ScrollTo turn on/off the line input switch Line To turn on/off the power amplifier switch- PowerAmpLCD Type To select the font on the display Font TypeSelect From- To to set the timer for the dimmer mode Selecting the dimmer modePress ¢ Or 4 to select Dimmer Set the timer Select a character Move the cursor to the nextUntil you finish Sources Maximum number CharactersPress and hold 0 until the angle adjustment screen appears Adjust the angle to the position you wantWhen using the remote controller Changing the control panel angleAttaching the control panel Detaching the control panelUnlock the control panel When the current disc is an audio CD or a CD Text disc CD Changer OperationsPlaying discs Select the CD automatic changerWhen the current disc is an MP3 disc To go to a particular disc directlyTo change the display pattern To go to the next track or the previous tracksPress Mode M while playing If the folder does not contain any MP3 tracks, it is skipped Select the number 1 6 for the disc you want to play To select a disc using the disc listsDisplay can show only six names at a time To play back tracks at random Random Play Random Folder Random Disc Random Off Random AllRepeat Track Repeat Disc Repeat Off Repeat FolderRepeat Disc Intro Track Intro Disc Intro OffPlaying an external component 3 Adjust the volume External Component OperationsSelect the external component Line For the DSP modes, seeWhat is DAB system? DAB Tuner OperationsSelect the DAB tuner Select the DAB band DAB1, DAB2, or DAB3When noises generated while running To tune in to a particular ensemble without searchingInterfere with your listening Start searching for an ensembleStoring DAB services in memory Tuning in to a preset DAB serviceOn page 7. When you select a Source, the power automaticallyService you want Selecting a preset service using the preset service listSelect the number 1 6 for a Using Announcement Standby Reception What you can do more withRoad Traffic Flash Standby Reception How Road Traffic Flash Standby Reception worksSelected announcement To activate Announcement Standby ReceptionDisplay and is stored into memory ANN announcement indicator either lights up or flashes How Announcement Standby Reception worksAnnouncement type EtcSearching your favorite service While receiving a DAB serviceTo use Alternative Reception While receiving an FM RDS stationChanging the display pattern Sound modes preset frequency level settings Sound Preset equalizing values ModeAdditional Information Available charactersTroubleshooting Symptoms Causes RemediesCD Changer Graphics MP3/WMA Playback Maintenance Handling discsSpecifications FM TunerMW Tuner LW TunerHaving Trouble with operation? Voordat u aan de montage van het apparaat Hinweis RemarqueDie folgenden Teile werden zusammen mit diesem Gerät geliefertEnglish Deutsch Français Nederlands Disconnect the speakers from this unit Koppel de speakers van dit apparaat los enConnect them to the amplifier. Leave Verbind ze aan de versterker