JVC KD-SH9101 To tune in to a particular ensemble without searching, DRC 1 DRC 2 DRC DRC Off

3 Start searching for an ensemble.

Press ¢ to search for ensembles of higher frequency.

Press 4 to search for ensembles of lower frequency.

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

4 Select a service (either primary or secondary) you want to listen to.

Press 5 (up) to select the next service. (If a primary service has some secondary services, they are selected before the next primary service is selected.)

Press ∞ (down) to select the previous service (either primary or secondary).

To tune in to a particular ensemble without searching

1Press SRC repeatedly to select DAB tuner as the source.

2Press and hold SRC for more than 1 second.

3Press SRC repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

4Press and hold ¢ or 4 for more than one second.

5Press ¢ or 4 repeatedly until the ensemble you want is reached.

•If you hold down the button, the frequency keeps changing until you release the button.

6Press 5 (up) or ∞ (down) to select a service (either primary or secondary) you want to listen to.

When noises generated while running
		ENGLISH
sounds will be hard to listen.
interfere with your listening
While driving, surrounding sounds will interfere
with your listening. Especially the low level
If this happens, you can reinforce the low level
sounds to improve your listening.
For this purpose, some service provides
Dynamic Range Control signals together with
their regular program signals.
1 Press MODE (M) while listening to	MODE
a DAB service.	M
“Mode” appears on the display, and
the number buttons start flashing.

2Press number button 1 repeatedly to activate the DRC function while “Mode” is still on the display.

1 2 3 4 5 6

Each time you press the button, the DRC function will be set as follows:

DRC 1 DRC 2 DRC 3

DRC Off

As the number increases, the DRC effect level also increases.

After about 5 seconds

The display returns to the source indication screen.

DRC indicator appears

•The DRC indicator will be highlighted

( ) only when the unit received DRC signals from the tuned service.

To cancel the DRC effect, select “DRC Off.”

63