JVC KD-SH9104, KD-SH9103, KD-SH9102 Store the adjustment you made, Enter the sound adjustment mode

ENGLISH

Storing your own sound modes

You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3).

1 Press SEL (select) twice to show the sound mode selection screen.

The last selected sound mode is

SEL

called up.

Ex. When “R & B” is selected previously

2 Press the number button to select one of the sound modes listed on the display.

4 Make adjustments as you like.

Buttons used for adjustments

1)Press ¢ or 4 to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz.

2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

5 Store the adjustment you made.

1 2 3 4 5 6

•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).

SEL

The confirmation message appears—whether you want to

store the adjustment.

3 Enter the sound adjustment mode.

The following sound mode adjustment screen appears on the display.

If you want to cancel the adjustment,

press DISP (D).

•Adjustment you made remains effective until you select another sound mode.

6 Press number button 1, 2 or 3 to select one of the user sound modes (USER 1, USER 2, or USER 3) you want to store into.

1 2 3 4 5 6

Ex. When you select “USER 1.”

36