ADC AD-26, WDA-540, AD-295, AD-540 user manual Program Location 01 PL01

D. PROGRAM LOCATION 01 (PL01)

(No Cycle In Progress)

and/or

FILL

(Close Program Switch)

70F

Perm Press

PL01

Perm Press

25 (Amount To Start)

To enter program mode, close program switch.

(Dryer Temperature Display)

Press “Perm Press” key. Display will read “PL01,” program location 01. Press “Perm Press” key. Display will read temperature conversion status, either Fahrenheit or Celsius. If no change, press “Perm Press” key. Should a change be necessary, press “HI” or “LO” key and then press “Perm Press” key.

	°FAr	or		°CEL
LO Temp		HI Temp	LO Temp	HI Temp
	°CEL	or		°FAr
				Display will read timing status,
				(timed or automatic). If no change,
		Perm Press		press “Perm Press” otherwise press
				“HI” or “LO” key and then “Perm
				Press” key.
	tInE	or		AUtO
LO Temp		HI Temp	LO Temp	HI Temp

AUtO

or

tInE

Continue

32