ADC AD-26, WDA-540, AD-295, AD-540 Program Location 02 PL02, PL02 Perm Press Pdry, Perm Press PL03

E. PROGRAM LOCATION 02 (PL02)

Percent dry from 90 to 100%

Refer to Section V for instructions on entering program locations.

Dryness level decrease

LO Temp

("Hold In" to Accelerate)

PL02

Perm Press

Pdry

(Wait 3-Seconds)

100

Location to be viewed/changed.

Display reads “PdrY” percent of dryness and the actual numeric value programmed (90-100%). If no change, press “Perm Press” key, otherwise press the “HI” or “LO” keys and then “Perm Press” key.

Dryness level Increase

HI Temp

("Hold In" to Accelerate)

Perm Press

PL03

Proceed to
next location	or
to be changed

To exit program mode open program switch

Summary: The percentage of dryness is programmable from a minimum of 90% to a maximum of 100%.

36