2.Electrical Service Specifications
ADG-464
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC AND 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A. When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY. Calculate/determine correct fuse value, by applying either local and/or National Electrical Codes to listed appliance amp draw data.
B.Circuit breakers are
C.Circuit breakers for
SERVICE |
| WIRE | APPROX. | MINIMUM | FUSING | CIRCUIT | ||
PHASE | AMP DRAW | Dual Element | ||||||
VOLTAGE | SERVICE | WIRE SIZE | BREAKER | |||||
| 60 Hz | 50 Hz | Time Delay | |||||
|
|
|
|
| ||||
208 | 3Ø | 3/4 | 107 | * | 150 | 150 | ||
240 | 3Ø | 3 | 104 | 109 | * | 150 | 150 | |
380 | 3Ø | 3/4 | 60 | * | 90 | 90 | ||
400 | 3Ø | 3/4 | 60 | * | 90 | 90 | ||
416 | 3Ø | 3/4 | 57 | * | 90 | 90 | ||
460 | 3Ø | 3/4 | 52 | * | 80 | 80 | ||
480 | 3Ø | 3/4 | 52 | * | 80 | 80 |
* AWG Stranded Wire Type...size wire as per National Electrical Code or local codes.
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the right side of the main electrical enclosure. In the case of 208 VAC or 240 VAC, the supply voltage must match the electric service specifications of the data label exactly.
WARNING: 208 VAC and 240 VAC ARE NOT THE SAME. Any damage done to the dryer components due to improper voltage will automatically VOID THE WARRANTY.
IMPORTANT: For proper sprinkler and dryer operation, sprinkler must be powered by a “separate or dedicated”
NOTE: For
NOTE: Contact the factory for electrical information not listed.
NOTE: ADC reserves the right to make changes in specifications at any time, without notice or obligation.
23