Back view: | Closet installation (dryer only): |
|
|
61/4" |
|
|
|
(159 mm) |
|
|
|
| 34" recommended | 3" |
|
| (76 mm) |
| |
Electric | (864 mm) |
| 48 in.2 |
18" min. |
| (310 cm2) | |
|
|
| |
| (457 mm) |
|
|
281/8" |
|
|
|
(715 mm) |
|
| 24 in.2 |
|
|
| |
31/2" | 4" | 3" | (155 cm2) |
| |||
(89 mm) | (102 mm) | (76 mm) |
|
|
|
|
|
| 1" |
Back exhaust | 1" | (25 mm) |
| ||
vent location | (25 mm) |
|
| Cabinet installation (dryer only): | |
| 14" |
|
| (358 mm) |
|
NOTE: Most installations require a minimum of 5" (127 mm) clearance behind dryer for exhaust vent with elbow. See “Venting Requirements.”
IMPORTANT: Do not operate, install, or store dryer where
it will be exposed to water, weather, or at temperatures below 45° F (7° C). Lower temperatures may cause dryer not to shut off at end of automatic sensor cycles, resulting in longer drying times.
Installation spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides and rear.
■■ Additional spacing should be considered for ease of installation and servicing.
7" 
(178 mm)
18"
(460 mm)
■■ Additional clearances might be required for wall, door, and floor moldings.
■■ Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required.
4"
(102 mm) 
1"
1" (25 mm)
Louvered doors with equivalent ventilitation openings are acceptable.
■■ Companion appliance spacing should also be considered.
(25 mm)
6