Emerson MAS 2600 user manual Technical Specifications

Installation & User Manual

Ed 19UK

Technical Specifications

Transducer Ranges:

Gauge: 0-3.5 / 0-7 / 0-16 / 0-35 m H2O.

Absolute: 0-20.394 / 0-35.690 m H2O.

Programmable Measuring Ranges:

Each transducer range is programmable in 8 steps.

Accuracy:

±0.25% F.S. at 20°C.

Stability:

Max. ± 0.1% / Year.

TEB (Total Error Band):

± 2.0% F.S. at -20 to +80°C.

EMC immunity influence < ±0.5%FS

Overload Capability:

Min. 4 x transducer range with no changes in calibration.

6 x transducer range burst pressure.

Built-in Temperature Sensor Pt100:

Optional.

Power Supply:

The Power Supply can vary from 17-33 VDC. Permissible load resistance is shown graphically below. Calculation formula:

ULoop -17V

Rloop max. (Kohm) = 25mA

Max. load resistance at various power supply

(ohm)	700
	600
	500
resistance	400
	300
	200
	100
	0
	17	20	23	26	29	32
Load
		Power supply (V)

Page 4 of 28

June 2013

Output Current:

4-20 mA DC, loop powered 2-wire system.

Current Limiting:

Max: 25 mA

Sensor Materials:

Housing: Titanium Grade 2

Diaphragm: Titanium Grade 4

Operating Temperature Ranges:
Transducer:	-20 to +125°C
Standard cable:	-20 to +	80°C
High temperature cable:	-20 to +125°C
Amplifier:	-40 to +	85°C

Protection Class:
Transducer:	IP 68
Amplifier:	IP 56

Intrinsic Safety:

Ex ia IIC T4 compliant.

Max. 75 m cable between transducer and transmitter amplifier.

Transmitter dimensions

Amplifier box:

110.0 55.0 98.0

	2600 SERIES
4-20 mA TWO WIRE TRANSMITTER				75.0	4 pcs. ø4.5	45.0
x EEX ia	C T5	S/N: 2600
CERTIFICATE REF.: 90-C.95948 Tamb.: -40 to +85 °C
Lint = 20 uH	Cint = 10 nF	Umax = 33 V	IK=< 45 mA
		MARINE AUTOMATION DENMARK

	PG11
1/8" NPT	cable gland	Use 4x20mm bolts and nuts
		for suspension on a 4mm
vent fitting		thick surface

Transducer:

3.06-core vented cable, ø8.0

30.0 25.0

120.0 Front view