Cisco Systems 10.x Applying a Patch, Optional To Enable Dynamic-Cluster-Configuration Using CLI

Chapter 1 Installing Cisco Unity Connection

Installation Tasks

Note In case you are using dynamic-cluster-configuration method of installation, then you just need to enable dynamic-cluster-configurationoption in the AFG tool and follow the step1.

2.After generating the answer files, create a floppy image. For more information, see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&exter nalId=1739.

3.Deploy and configure the servers in the cluster, publisher and subscriber. For more information, see the To Configure the Publisher Server on Virtual Machine, page 1-17and To Configure the Subscriber Server on Virtual Machine, page 1-17section.

4.To install the publisher server, see the Installing the Publisher Server, page 1-12section for cluster deployment.

5.The installation of subscriber continues if:

•You enable the dynamic-cluster-configuration timer.

•The clusterConfig.xml files are present.

(Optional) To Enable Dynamic-Cluster-Configuration Using CLI

Step 1 You can enable Dynamic-Cluster-Configuration through the CLI for up to an hour using the command: set network cluster subscriber dynamic-cluster-config {default no. of hours}. For more information, see the Set command chapter of Command Line Interface Guide for Cisco Unified Communications Solutions, Release 10.0(1) guide at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cli_ref/10_0_1/CUCM_BK_CBEED39F_ 00_cucm-cli-reference-guide-100/CUCM_BK_CBEED39F_00_cucm-cli-reference-guide-100_chapter _0111.html#CUCM_CL_SD4F263F_00.

Step 2 Add the new cluster subscriber through the CLI in the following format: set network cluster subscriber details <servertype> <hostname> <ip> <domainname>.

Step 3 You can use show network cluster CLI to check the entries in the processnode table. For more information, see show command chapter of Command Line Interface Guide for Cisco Unified Communications Solutions, Release 10.0(1) guide at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cli_ref/10_0_1/CUCM_BK_CBEED39F_ 00_cucm-cli-reference-guide-100/CUCM_BK_CBEED39F_00_cucm-cli-reference-guide-100_chapter _0111.html#CUCM_CL_SD4F263F_00.

Applying a Patch

You must obtain the appropriate upgrade file from Cisco.com before you can upgrade during installation. To apply a patch, select Yes in the Apply a Patch window that appears during the installation of publisher or subscriber server. The installation wizard installs the software version on the DVD first and then restarts the system.

Note You can upgrade to any supported higher release if you have a full patch of the release not an Engineering Special (ES).

Install, Upgrade, and Maintenance Guide for Cisco Unity Connection Release 10.x

1-19