Cisco Systems 10.x manual Restarting All Ports to Take Calls

Chapter 4 Configuring Cisco Unity Connection Cluster

Administering a Unity Connection Cluster

Step 3 On the Cluster Management page, under Port Manager, in the Change Port Status column, select Stop Taking Calls for the server.

Restarting All Ports to Take Calls

Follow the steps in this section to restart all the ports on a Unity Connection server to allow them take calls again after they were stopped.

To Restart All Ports on a Unity Connection Server to Take Calls

Step 1 Sign in to Cisco Unity Connection Serviceability.

Step 2 Expand the Tools menu, select Cluster Management.

Step 3 On the Cluster Management page, under Port Manager, in the Change Port Status column, select Take Calls for the server.

Server Status and its Functions in a Unity Connection Cluster

Each server in the cluster has a status that appears on the Cluster Management page of Cisco Unity Connection Serviceability. The status indicates the functions that the server is currently performing in the cluster, as described in Table 4-2.

Install, Upgrade, and Maintenance Guide for Cisco Unity Connection Release 10.x

4-5